Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
this list is subscribers only, so to be allowed to post here, you have to subscribe. On Thu, Sep 20, 2007 at 05:03:51PM +0530, kishore kumar wrote: > Hi, > > In My test setup(Two PCs running DRBD) I'm using DRBD version 0.7.21. I'm > frequently seeing a problem of DRBD getting stalled after resyncing 100% at > the SyncTarget. The output of "/etc/init.d/drbd status" command is as > follows. > > > 0: cs:SyncTarget st:Secondary/Primary ld:Inconsistent > > ns:0 nr:44780 dw:44780 dr:0 al:0 bm:17 lo:0 pe:0 ua:0 ap:0 > > [===================>] sync'ed:100.0% (0/14956)K > > stalled > > 1: cs:PausedSyncT st:Secondary/Primary ld:Inconsistent > > ns:0 nr:20880 dw:20880 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 > > 2: cs:Unconfigured > > 3: cs:Unconfigured > > 4: cs:Unconfigured > > When I searched through the mails, I found out that it is fixed in version > 8. > > http://archives.free.net.ph/message/20070604.090859.3c7fb49b.en.html no. that is a different thing altogether. > But I cannot move to version 8, as I have some issues with rolling upgrade > from 0.7 to 8. Also, I cannot do a reverse merge from version 8 to version > 7.21 as the code is changed from 7.21 to 8. > > Can anyone please help me out in fixing the stalling issue in version 7.21. you could first try whether an upgrade to 0.7.24 helps. and to get things going again, you could simply try "drbdadm disconnect; drbdadm connect" -- : Lars Ellenberg http://www.linbit.com : : DRBD/HA support and consulting sales at linbit.com : : LINBIT Information Technologies GmbH Tel +43-1-8178292-0 : : Vivenotgasse 48, A-1120 Vienna/Europe Fax +43-1-8178292-82 : __ please use the "List-Reply" function of your email client.