Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Philipp, Have you initialized the cluster to start with (i.e. is this a new cluster)? Gary Wayne Smith > -----Original Message----- > From: drbd-user-bounces at lists.linbit.com [mailto:drbd-user- > bounces at lists.linbit.com] On Behalf Of Philipp F. > Sent: Tuesday, March 14, 2006 4:51 AM > To: drbd-user at lists.linbit.com > Subject: [DRBD-user] DRBD starting problems > > Hi all > I got a 2-node Cluster work on Fedora Core 4 with DRBD 0.7.17. When > I start DRBD on node1, following lines appears: > ========== > root at node1 /]# /etc/rc.d/init.d/drbd start > Starting DRBD resources: [ d0 s0 n0 ]. > .......... > *************************************************************** > DRBD's startup script waits for the peer node(s) to appear. > - In case this node was already a degraded cluster before the > reboot the timeout is 120 seconds. [degr-wfc-timeout] > - If the peer was available before the reboot the timeout will > expire after 120 seconds. [wfc-timeout] > (These values are for resource 'drbd0'; 0 sec -> wait forever) > To abort waiting enter 'yes' [ 13]: > ========== > Then, when I start DRBD on node2, the line "drbd0: I am > inconsistent, but there is no sync? BOTH nodes inconsisten" appears. > Where's the problem? > > > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user