Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
I found the problem, tnx! >Philipp, > >Have you initialized the cluster to start with (i.e. is this a new >cluster)? > >Gary Wayne Smith > > > -----Original Message----- > > From: drbd-user-bounces at lists.linbit.com [mailto:drbd-user- > > bounces at lists.linbit.com] On Behalf Of Philipp F. > > Sent: Tuesday, March 14, 2006 4:51 AM > > To: drbd-user at lists.linbit.com > > Subject: [DRBD-user] DRBD starting problems > > > > Hi all > > I got a 2-node Cluster work on Fedora Core 4 with DRBD 0.7.17. When > > I start DRBD on node1, following lines appears: > > ========== > > root at node1 /]# /etc/rc.d/init.d/drbd start > > Starting DRBD resources: [ d0 s0 n0 ]. > > .......... > > *************************************************************** > > DRBD's startup script waits for the peer node(s) to appear. > > - In case this node was already a degraded cluster before the > > reboot the timeout is 120 seconds. [degr-wfc-timeout] > > - If the peer was available before the reboot the timeout will > > expire after 120 seconds. [wfc-timeout] > > (These values are for resource 'drbd0'; 0 sec -> wait forever) > > To abort waiting enter 'yes' [ 13]: > > ========== > > Then, when I start DRBD on node2, the line "drbd0: I am > > inconsistent, but there is no sync? BOTH nodes inconsisten" appears. > > Where's the problem? > > > > > > _______________________________________________ > > drbd-user mailing list > > drbd-user at lists.linbit.com > > http://lists.linbit.com/mailman/listinfo/drbd-user