Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
thanks for the quick reply! :) Sorry I think I didn't explain the stituation clearly. I was trying to mount the primary side's device. I was wondering it happened becuase of LVM2, because I am using DRBD on top of LVM2 with kernel 2.6.10 cheers David Huang -----Original Message----- From: M-Ackermann [mailto:Manfred.Ackermann at t-systems.com] Sent: Thursday, April 14, 2005 6:55 PM To: david_huang at proware.com.tw Subject: AW: [DRBD-user] unable to mount DRBD device? > After syncing an existing filesystem to secondary, I try to mount the drbd device, > however it always shows "mount: /dev/drbd0: can't read superblock", is there > something wrong in my config file? the filesystem is using XFS and I am using > DRBD 0.7.8 Remember: Only the primary side can be mounted! You're sure you've keept that in mind? --- Manfred Ackermann T-Systems Systems Integration > Systemadministrator SSC NITS Industry Business Unit Telco T-Systems International GmbH Utbremer Strase 90, D-28217 Bremen Telefon: +49 421 3799-815 Telefax: +49 421 3799-169 E-Mail: prsm-eznord at t-systems.com Internet: http://www.t-systems.com -----Ursprungliche Nachricht----- Von: drbd-user-bounces at lists.linbit.com [mailto:drbd-user-bounces at lists.linbit.com]Im Auftrag von David Huang Gesendet: Donnerstag, 14. April 2005 12:51 An: drbd-user at lists.linbit.com Betreff: [DRBD-user] unable to mount DRBD device? hello everyone I am experiencing some problem when I am using DRBD. After syncing an existing filesystem to secondary, I try to mount the drbd device, however it always shows "mount: /dev/drbd0: can't read superblock", is there something wrong in my config file? the filesystem is using XFS and I am using DRBD 0.7.8 the attachment is my drbd.conf cheers David Huang