[DRBD-user] drbd raid stays at state peer: Connecting

G. Milo gianni.milo22 at gmail.com
Sun Oct 17 12:21:08 CEST 2021


I doubt there's something blocking the resource "hastig" as I assume the
resource was working fine in the past on both nodes? Disabling firewall on
both nodes temporarily would rule out that possibility.Most likely you are
facing some kind of network congestion on the replication network.

Does "drbdadm disconnect hastig" followed by "drbdadm adjust hastig" make a
difference? Otherwise you may need to check the syslog for further clues. I
noticed that you have 4 volumes in that resource. Is there a specific need
to have them configured on one resource rather than creating a separate
resource for each ? I'm not saying it's wrong, it's kind of unusual...



On Sun, 17 Oct 2021 at 10:07, Christoph Pleger <
Christoph.Pleger at cs.tu-dortmund.de> wrote:

> Hello,
>
> on two servers, I created two drbd resources, where one server is the
> primary for the first resource and the other server is the primary for
> the second resource. A dump of my setup is attached.
>
> Unfortunately, the drbd RAID works for the first resource, but it does
> not for the second. "drbdadm status" since almost two days now shows on
> the first machine:
>
> grobi role:Primary
>   volume:2 disk:UpToDate
>   peer role:Secondary
>
> volume:2 replication:Established peer-disk:UpToDate
>
> hastig
> role:Secondary
>   volume:1 disk:Inconsistent
>   volume:3 disk:Inconsistent
>
> volume:4 disk:Inconsistent
>   volume:5 disk:Inconsistent
>   peer: Connecting
>
> On the second machine, it shows:
>
> grobi role:Secondary
>   volume:2 disk:UpToDate
>   peer role:Primary
>
> volume:2 replication:Established peer-disk:UpToDate
>
> hastig role:Primary
>
> volume:1 disk:UpToDate
>   volume:3 disk:UpToDate
>   volume:4 disk:UpToDate
>
> volume:5 disk:UpToDate
>
>
> Any idea what is going on and what I can do now to make RAID hastig
> work? The two machines are in the same network and I have disabled all
> local ip filter rules, so I do not know what might be blocking the
> connection between the two servers ...
>
> Regards
>   Christoph
>
>
> _______________________________________________
> Star us on GITHUB: https://github.com/LINBIT
> drbd-user mailing list
> drbd-user at lists.linbit.com
> https://lists.linbit.com/mailman/listinfo/drbd-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20211017/48e52e46/attachment.htm>


More information about the drbd-user mailing list