Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Are you utilising SSDs?
Is the kernel log (dmesg) clean from errors on the backing devices (also mdraid members/backing devices)?
Did you verify the mdraid array consistency and are the array's members in sync?
-------- Ursprüngliche Nachricht --------
Von: d tbsky <tbskyd at gmail.com>
Gesendet: 18. Mai 2016 18:27:00 MESZ
An: Veit Wahlich <cru.lists at zodia.de>
CC: drbd-user at lists.linbit.com
Betreff: Re: [DRBD-user] drbdadm verify always report oos
Hi:
I shutdown the vm when I found the strange behavior. so the drbd
is resync under idle situation. I try to play with config options and
resync about 15 times, still can not get verify report 0 oos.
I have about 10 resource which has verify problem. but it's strange
that some resources are ok. the largest resource is about 1T and it is
ok. the resource I am testing now is only 32G.
the host structure is: two sata disk (mdadm raid 1) -> lvm -> drbd
the host has ecc ram so the memory is ok. the most confusing part
is the resync data is very small, it is only a few kilo bytes and sync
done in 1 seconds. I don't know why it can not be synced correctly. I
also try to run command "md5sum /dev/drbdX" at both node to check.
they are indeed different.