Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi, I'm running Intel e1000 with crossover cable, and I just noticed in my log files I'm getting this: [3535162.766591] e1000e: eth1 NIC Link is Down [3535168.243278] e1000e: eth1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: Rx/Tx [3535168.243282] e1000e 0000:02:00.0: eth1: 10/100 speed: disabling TSO [3535176.574432] e1000e: eth1 NIC Link is Down [3535178.495165] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [3535214.602022] e1000e: eth1 NIC Link is Down [3535214.602465] e1000e 0000:02:00.0: eth1: Reset adapter [3535239.602540] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Interesting. Gerald ----- Original Message ----- > From: "cesar" <brain at click.com.py> > To: drbd-user at lists.linbit.com > Sent: Wednesday, June 26, 2013 5:56:17 PM > Subject: Re: [DRBD-user] r0 ok, r1 PingAck did not arrive in time > > Hi Lukas Gradl-4 > > I have PVE 2.3 with the same problem > > But my NICs are Realtek, and soon i will change of brand for Intel, > and i > have connected in crossover-cable mode, because a "Switch" in the > middle can > change the data of the packets. > > Please answer this questions: > > What are the model of your NICs for use with DRBD on each PVE Node? > > Do you have the link in crossover-cable mode (ie link NIC to NIC)?, > if not, > just do it !!! (DRBD suggested highly do NIC to NIC) > > The latest "PVE 2.3" and "PVE 3.x" version have the kernel for > support DRBD > 8.3.13, update your PVE and your DRBD and after you must do test. > After, > please tell me about of this test. > > When i have my new NICs Intel, i will can tell you about of my > experiences > > Best regards > Cesar > > > > -- > View this message in context: > http://drbd.10923.n7.nabble.com/r0-ok-r1-PingAck-did-not-arrive-in-time-tp17953p17960.html > Sent from the DRBD - User mailing list archive at Nabble.com. > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user >