Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Lionel & Felix thank you. I realized my mistake. 25.03.2011 14:45, Lionel Sausin пишет: > Dear Михаил Евстратов, > You must not bring down the stacked resource, you have must mkfs onto it. > If your stacked resource is /dev/drbd1 then just do: > drbdadm --stacked up r0-U > mkfs.ext3 /dev/drbd1 > Lionel Sausin. > > Le -10/01/-28163 20:59, Михаил Евстратов a écrit : >> Hi! >> >> I have three-node configuration. >> (Like this >> http://www.howtoforge.com/drbd-8.3-third-node-replication-with-debian-etch) >> >> >> When I run >> >> drbdadm --stacked down r0-U >> and >> mkfs.ext3 /dev/drbd0 >> >> and run >> drbdadm --stacked up r0-U >> >> an error >> >> drbdadm --stacked up r0-U >> 10: Failure: (119) No valid meta-data signature found. >> >> ==> Use 'drbdadm create-md res' to initialize meta-data area. <== >> >> Command 'drbdsetup 10 disk /dev/drbd0 /dev/drbd0 internal >> --set-defaults --create-device' terminated with exit code 10 >> >> If I run >> >> drbdadm --stacked create-md r0-U >> >> an error >> >> md_offset 536847597568 >> al_offset 536847564800 >> bm_offset 536831180800 >> >> Found ext3 filesystem >> 524265236 kB data area apparently used >> 524249200 kB left usable by current configuration >> >> Device size would be truncated, which >> would corrupt data and result in >> 'access beyond end of device' errors. >> You need to either >> * use external meta data (recommended) >> * shrink that filesystem first >> * zero out the device (destroy the filesystem) >> Operation refused. >> >> Command 'drbdmeta 10 v08 /dev/drbd0 internal create-md' terminated >> with exit code 40 >> drbdadm create-md r0-U: exited with code 40 >> >> Help me please >> >> Mikhail Evstratov >> >> >> >> > > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user