Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Dear Михаил Евстратов, You must not bring down the stacked resource, you have must mkfs onto it. If your stacked resource is /dev/drbd1 then just do: drbdadm --stacked up r0-U mkfs.ext3 /dev/drbd1 Lionel Sausin. Le -10/01/-28163 20:59, Михаил Евстратов a écrit : > Hi! > > I have three-node configuration. > (Like this > http://www.howtoforge.com/drbd-8.3-third-node-replication-with-debian-etch) > > When I run > > drbdadm --stacked down r0-U > and > mkfs.ext3 /dev/drbd0 > > and run > drbdadm --stacked up r0-U > > an error > > drbdadm --stacked up r0-U > 10: Failure: (119) No valid meta-data signature found. > > ==> Use 'drbdadm create-md res' to initialize meta-data area. <== > > Command 'drbdsetup 10 disk /dev/drbd0 /dev/drbd0 internal > --set-defaults --create-device' terminated with exit code 10 > > If I run > > drbdadm --stacked create-md r0-U > > an error > > md_offset 536847597568 > al_offset 536847564800 > bm_offset 536831180800 > > Found ext3 filesystem > 524265236 kB data area apparently used > 524249200 kB left usable by current configuration > > Device size would be truncated, which > would corrupt data and result in > 'access beyond end of device' errors. > You need to either > * use external meta data (recommended) > * shrink that filesystem first > * zero out the device (destroy the filesystem) > Operation refused. > > Command 'drbdmeta 10 v08 /dev/drbd0 internal create-md' terminated > with exit code 40 > drbdadm create-md r0-U: exited with code 40 > > Help me please > > Mikhail Evstratov > > > >