Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
On Wed, Mar 03, 2010 at 05:16:29PM +0100, Bernd Giese wrote: > Hello, > > i have two server with 2 local 10GB LUN'S on two different EMC Systems. > > I've created a primary/primary /dev/drbd0 block device with the two LUN's > as /dev/mapper/xxx devices and the /dev/drbd0 device syncronized fine. > > After this i created a volgroup on the /dev/drbd0 device. > > Finaly i try to create a Logvol with a gfs Partition and this unfortunatly > failed. > > The cluster configuration is ok, because they are running with a shared > GFS on the same EMC Maschine. > > My question now, is there a problem with emc san devices and drbd, because > emc contraoller is an active/passive controller ? > > Or do i have to switch to a primary/standby DRBD-Configuration. I'm not aware of any such problem. Most likely you did something you did not mean to, or forgot something "obvious". -- : Lars Ellenberg : LINBIT | Your Way to High Availability : DRBD/HA support and consulting http://www.linbit.com DRBD® and LINBIT® are registered trademarks of LINBIT, Austria. __ please don't Cc me, but send to list -- I'm subscribed