Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
So, it appears that if I edit the /usr/src/drbd-8.3/debian/rules file, change the ./configure line to use '--prefix=/usr' and add '--localstatedir=/var', everything builds and installs properly. If this is agreed upon, I recommend this change be made to the source so that others don't spend the several hours I did finding and testing this change. Tested on Debian Lenny 5.0.3, all current packages, drbd 8.3.6 using git, following the documentation for building .deb packages for Debian as found at: http://www.drbd.org/users-guide-emb/s-build-deb.html Bryan L. Gay wrote: > After further research, I found that /usr/src/drbd-8.3/debian/rules > contained a configure script command that included '--prefix=/' > I edited this file and changed the option to '--prefix=/usr/' and > rebuilt. > Everything is in its proper place, except for /var/lib/drbd which > moved to /usr/var/lib/drbd due to the new prefix. This is not > consistent with previous behavior. > > I'll be testing additional changes to the rules file to try to fix > this and let you know what I find. > > If I can contribute to drbd, please let me know. I have spare servers > online with the ability to remove/re-install drbd as needed. > > Bryan L. Gay wrote: >> I just ran into the same problem as a previous post described by >> Billy Guthrie on Nov 19, 2009. >> >> I had drbd running as version 8.3.4 and decided to go ahead and >> upgrade to 8.3.6. I retrieved a fresh copy of the git tree and made >> Debian packages per the instructions on the site: >> http://www.drbd.org/users-guide-emb/s-build-deb.html >> This is the same installation procedure I followed with 8.3.4, so >> something has changed and borked the install paths: >> >> cd /usr/src >> git clone http://git.drbd.org/drbd-8.3.git >> cd drbd-8.3 >> git checkout drbd-8.3.6 >> dpkg-buildpackage -b -uc >> cd .. >> dpkg -i drbd8*.deb >> module-assistant auto-install drbd8 >> >> After rebooting, I found drbd to be running successfully, so I then >> chkconfig'd it off and started the corosync cluster. I had put the >> node in standby earlier, so I just ran 'crm node online' only to find >> the /usr/lib/ocf/resource.d/linbit directory was missing. I did find >> a directory named /lib/ocf/resource.d/linbit which appeared to be the >> correct directory in the wrong place. >> >> Florin's reply to the post indicated to run autoheader and autoconf, >> then build again. This is not in the installation instructions. I >> tried running autoheader in the /usr/src/drbd-8.3 directory and got >> this: >> >> # autoheader >> autoheader: error: AC_CONFIG_HEADERS not found in configure.ac >> >> It looks to me like the _PREFIX isn't getting set to /usr when >> building the debian packages: >> >> # locate drbd | grep -v '/usr/src' >> /etc/drbd.conf >> /etc/drbd.conf.dpkg-dist >> /etc/bash_completion.d/drbdadm >> /etc/ha.d/resource.d/drbddisk >> /etc/ha.d/resource.d/drbdupper >> /etc/init.d/drbd >> /etc/rc0.d/K08drbd >> /etc/rc1.d/K08drbd >> /etc/rc2.d/S70drbd >> /etc/rc3.d/S70drbd >> /etc/rc4.d/S70drbd >> /etc/rc5.d/S70drbd >> /etc/rc6.d/K08drbd >> /etc/udev/rules.d/65-drbd.rules >> /etc/xen/scripts/block-drbd >> /lib/drbd >> /lib/drbd/crm-fence-peer.sh >> /lib/drbd/crm-unfence-peer.sh >> /lib/drbd/notify-emergency-reboot.sh >> /lib/drbd/notify-emergency-shutdown.sh >> /lib/drbd/notify-io-error.sh >> /lib/drbd/notify-out-of-sync.sh >> /lib/drbd/notify-pri-lost-after-sb.sh >> /lib/drbd/notify-pri-lost.sh >> /lib/drbd/notify-pri-on-incon-degr.sh >> /lib/drbd/notify-split-brain.sh >> /lib/drbd/notify.sh >> /lib/drbd/outdate-peer.sh >> /lib/drbd/snapshot-resync-target-lvm.sh >> /lib/drbd/unsnapshot-resync-target-lvm.sh >> /lib/modules/2.6.26-2-amd64/kernel/drivers/block/drbd.ko >> /lib/ocf/resource.d/linbit/drbd >> /sbin/drbd-overview >> /sbin/drbdadm >> /sbin/drbdmeta >> /sbin/drbdsetup >> /share/man/man5/drbd.conf.5 >> /share/man/man8/drbd.8 >> /share/man/man8/drbdadm.8 >> /share/man/man8/drbddisk.8 >> /share/man/man8/drbdmeta.8 >> /share/man/man8/drbdsetup.8 >> /usr/lib/ocf/resource.d/heartbeat/drbd >> /usr/share/doc/drbd8-module-2.6.26-2-amd64 >> /usr/share/doc/drbd8-module-source >> /usr/share/doc/drbd8-utils >> /usr/share/doc/drbd8-module-2.6.26-2-amd64/changelog.Debian.gz >> /usr/share/doc/drbd8-module-2.6.26-2-amd64/copyright >> /usr/share/doc/drbd8-module-source/changelog.Debian.gz >> /usr/share/doc/drbd8-module-source/changelog.gz >> /usr/share/doc/drbd8-module-source/copyright >> /usr/share/doc/drbd8-utils/README.Debian >> /usr/share/doc/drbd8-utils/TODO.Debian >> /usr/share/doc/drbd8-utils/changelog.Debian.gz >> /usr/share/doc/drbd8-utils/changelog.gz >> /usr/share/doc/drbd8-utils/copyright >> /usr/share/modass/overrides/drbd8-module-source >> /var/cache/modass/drbd8-module-source.avail_version >> /var/cache/modass/drbd8-module-source.buildlog.2.6.26-2-amd64.1257786992 >> /var/cache/modass/drbd8-module-source.buildlog.2.6.26-2-amd64.1262116984 >> /var/cache/modass/drbd8-module-source.buildstate.2.6.26-2-amd64 >> /var/cache/modass/drbd8-module-source.cur_version >> /var/lib/drbd >> /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.list >> /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.md5sums >> /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.postinst >> /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.postrm >> /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.preinst >> /var/lib/dpkg/info/drbd8-module-source.list >> /var/lib/dpkg/info/drbd8-module-source.md5sums >> /var/lib/dpkg/info/drbd8-utils.conffiles >> /var/lib/dpkg/info/drbd8-utils.list >> /var/lib/dpkg/info/drbd8-utils.md5sums >> /var/lib/dpkg/info/drbd8-utils.postinst >> /var/lib/dpkg/info/drbd8-utils.postrm >> /var/lib/dpkg/info/drbd8-utils.prerm >> /var/lib/drbd/drbd-minor-0.conf >> /var/lib/drbd/node_id >> /var/lock/drbd-147-0 >> >> Shouldn't everything appearing under /lib be under /usr/lib ?? >> What's the easiest fix/workaround for me to get these packages >> built/installed in the proper locations?