Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
After further research, I found that /usr/src/drbd-8.3/debian/rules contained a configure script command that included '--prefix=/' I edited this file and changed the option to '--prefix=/usr/' and rebuilt. Everything is in its proper place, except for /var/lib/drbd which moved to /usr/var/lib/drbd due to the new prefix. This is not consistent with previous behavior. I'll be testing additional changes to the rules file to try to fix this and let you know what I find. If I can contribute to drbd, please let me know. I have spare servers online with the ability to remove/re-install drbd as needed. Bryan L. Gay wrote: > I just ran into the same problem as a previous post described by Billy > Guthrie on Nov 19, 2009. > > I had drbd running as version 8.3.4 and decided to go ahead and > upgrade to 8.3.6. I retrieved a fresh copy of the git tree and made > Debian packages per the instructions on the site: > http://www.drbd.org/users-guide-emb/s-build-deb.html > This is the same installation procedure I followed with 8.3.4, so > something has changed and borked the install paths: > > cd /usr/src > git clone http://git.drbd.org/drbd-8.3.git > cd drbd-8.3 > git checkout drbd-8.3.6 > dpkg-buildpackage -b -uc > cd .. > dpkg -i drbd8*.deb > module-assistant auto-install drbd8 > > After rebooting, I found drbd to be running successfully, so I then > chkconfig'd it off and started the corosync cluster. I had put the > node in standby earlier, so I just ran 'crm node online' only to find > the /usr/lib/ocf/resource.d/linbit directory was missing. I did find a > directory named /lib/ocf/resource.d/linbit which appeared to be the > correct directory in the wrong place. > > Florin's reply to the post indicated to run autoheader and autoconf, > then build again. This is not in the installation instructions. I > tried running autoheader in the /usr/src/drbd-8.3 directory and got this: > > # autoheader > autoheader: error: AC_CONFIG_HEADERS not found in configure.ac > > It looks to me like the _PREFIX isn't getting set to /usr when > building the debian packages: > > # locate drbd | grep -v '/usr/src' > /etc/drbd.conf > /etc/drbd.conf.dpkg-dist > /etc/bash_completion.d/drbdadm > /etc/ha.d/resource.d/drbddisk > /etc/ha.d/resource.d/drbdupper > /etc/init.d/drbd > /etc/rc0.d/K08drbd > /etc/rc1.d/K08drbd > /etc/rc2.d/S70drbd > /etc/rc3.d/S70drbd > /etc/rc4.d/S70drbd > /etc/rc5.d/S70drbd > /etc/rc6.d/K08drbd > /etc/udev/rules.d/65-drbd.rules > /etc/xen/scripts/block-drbd > /lib/drbd > /lib/drbd/crm-fence-peer.sh > /lib/drbd/crm-unfence-peer.sh > /lib/drbd/notify-emergency-reboot.sh > /lib/drbd/notify-emergency-shutdown.sh > /lib/drbd/notify-io-error.sh > /lib/drbd/notify-out-of-sync.sh > /lib/drbd/notify-pri-lost-after-sb.sh > /lib/drbd/notify-pri-lost.sh > /lib/drbd/notify-pri-on-incon-degr.sh > /lib/drbd/notify-split-brain.sh > /lib/drbd/notify.sh > /lib/drbd/outdate-peer.sh > /lib/drbd/snapshot-resync-target-lvm.sh > /lib/drbd/unsnapshot-resync-target-lvm.sh > /lib/modules/2.6.26-2-amd64/kernel/drivers/block/drbd.ko > /lib/ocf/resource.d/linbit/drbd > /sbin/drbd-overview > /sbin/drbdadm > /sbin/drbdmeta > /sbin/drbdsetup > /share/man/man5/drbd.conf.5 > /share/man/man8/drbd.8 > /share/man/man8/drbdadm.8 > /share/man/man8/drbddisk.8 > /share/man/man8/drbdmeta.8 > /share/man/man8/drbdsetup.8 > /usr/lib/ocf/resource.d/heartbeat/drbd > /usr/share/doc/drbd8-module-2.6.26-2-amd64 > /usr/share/doc/drbd8-module-source > /usr/share/doc/drbd8-utils > /usr/share/doc/drbd8-module-2.6.26-2-amd64/changelog.Debian.gz > /usr/share/doc/drbd8-module-2.6.26-2-amd64/copyright > /usr/share/doc/drbd8-module-source/changelog.Debian.gz > /usr/share/doc/drbd8-module-source/changelog.gz > /usr/share/doc/drbd8-module-source/copyright > /usr/share/doc/drbd8-utils/README.Debian > /usr/share/doc/drbd8-utils/TODO.Debian > /usr/share/doc/drbd8-utils/changelog.Debian.gz > /usr/share/doc/drbd8-utils/changelog.gz > /usr/share/doc/drbd8-utils/copyright > /usr/share/modass/overrides/drbd8-module-source > /var/cache/modass/drbd8-module-source.avail_version > /var/cache/modass/drbd8-module-source.buildlog.2.6.26-2-amd64.1257786992 > /var/cache/modass/drbd8-module-source.buildlog.2.6.26-2-amd64.1262116984 > /var/cache/modass/drbd8-module-source.buildstate.2.6.26-2-amd64 > /var/cache/modass/drbd8-module-source.cur_version > /var/lib/drbd > /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.list > /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.md5sums > /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.postinst > /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.postrm > /var/lib/dpkg/info/drbd8-module-2.6.26-2-amd64.preinst > /var/lib/dpkg/info/drbd8-module-source.list > /var/lib/dpkg/info/drbd8-module-source.md5sums > /var/lib/dpkg/info/drbd8-utils.conffiles > /var/lib/dpkg/info/drbd8-utils.list > /var/lib/dpkg/info/drbd8-utils.md5sums > /var/lib/dpkg/info/drbd8-utils.postinst > /var/lib/dpkg/info/drbd8-utils.postrm > /var/lib/dpkg/info/drbd8-utils.prerm > /var/lib/drbd/drbd-minor-0.conf > /var/lib/drbd/node_id > /var/lock/drbd-147-0 > > Shouldn't everything appearing under /lib be under /usr/lib ?? > What's the easiest fix/workaround for me to get these packages > built/installed in the proper locations?