Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
>>>>> Rob Morin writes:
Rob> OK so i just read on a post that i am not suppose to have heartbeat
Rob> and my services start on boot up..... so i removed them from startup
Rob> via the "update-rc.d -f heartbeat remove" command on my Debian
Rob> system and then rebooted, everything came up????
Only 'heartbeat' needs to be set as start-on-boot, not services. I run
similar configuration on CentOS 5, with all services (which are
resources in my heartbeat config) removed from the startup.
Rob> Hhmmm can i not add heartbeat as an S99heartbeat on start up rather
Rob> than have to manually start it after boot?
Rob> also i see this in my /proc/drbd n the primary
Rob> version: 8.0.4 (api:86/proto:86)
Rob> SVN Revision: 2947 build by root at stewie, 2008-01-17 12:26:19
Rob> 0: cs:StandAlone st:Primary/Unknown ds:UpToDate/DUnknown r---
Rob> ns:0 nr:0 dw:40 dr:1549 al:0 bm:0 lo:0 pe:0 ua:0 ap:0
Rob> resync: used:0/31 hits:0 misses:0 starving:0 dirty:0 changed:0
Rob> act_log: used:0/257 hits:10 misses:0 starving:0 dirty:0 changed:0
Rob> And on secondary...
Rob> version: 8.0.4 (api:86/proto:86)
Rob> SVN Revision: 2947 build by root at megs, 2008-01-17 13:19:05
Rob> 0: cs:StandAlone st:Secondary/Unknown ds:UpToDate/DUnknown r---
Rob> ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0
Rob> resync: used:0/31 hits:0 misses:0 starving:0 dirty:0 changed:0
Rob> act_log: used:0/257 hits:0 misses:0 starving:0 dirty:0 changed:0
Rob> Does this mean drbd is not working correctly?
Above output suggest nodes aren't connected, probably due to
split-brain. So you need to fix split-brain.
Rob> Rob Morin wrote:
[snipped]
>>
>> A ps -ax shows this after the reboot, but nothing comes up the ip is
>> not enabled and my /var/www i snot mounted
>>
>> 2957 ? S 0:00 [drbd0_worker]
>> 2972 ? S 0:00 [drbd0_receiver]
>> 2987 ? S 0:00 ha_logd: read process
>> 2988 ? S 0:00 ha_logd: write process
>> 3112 ? SLs 0:00 heartbeat: master control process
>> 3119 ? Ss 0:00 /usr/sbin/atd
>> 3126 ? Ss 0:00 /usr/sbin/cron
>> 3139 ? SL 0:00 heartbeat: FIFO reader
>> 3140 ? SL 0:00 heartbeat: write: ping 192.168.5.1
>> 3141 ? SL 0:00 heartbeat: read: ping 192.168.5.1
>> 3148 ? SL 0:00 heartbeat: write: serial /dev/ttyS0
>> 3149 ? SL 0:00 heartbeat: read: serial /dev/ttyS0
Heartbeat doesn't starts activating resources immediately after
starting. So you've to wait for sometime. Keep an eye on heartbeat
logs at primary.
HTH
--
Ashish Shukla आशीष शुक्ल http://wahjava.wordpress.com/
·-- ·- ···· ·--- ·- ···- ·- ·--·-· --· -- ·- ·· ·-·· ·-·-·- -·-· --- --
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 188 bytes
Desc: not available
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20080120/759a13e9/attachment.pgp>