Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
dear sir:
After I installed , configed ,and started drbd on both hosts,it seemed that there was no error,but host1's state was"StandAlone,primeray/unknown";host2's state was"StandAlone,Secondary/unknown".It seemed the two peers didn't communicate whith each other.
On host1 I commanded:"modprobe drbd;drbdadm up all;drbdadm --connect all;drbdadm primary all".
On host2 I commanded:"modprobe drbd;drbdadm up all;drbdadm --connect all;drbdadm secondary all".
I use FC5 & DRBD-0.7.23.
on host1{
device /dev/drbd0;
disk /dev/hdc3;
address 192.168.0.136:7788;
meta-disk internal;
on host2 {
device /dev/drbd0;
disk /dev/hdc2;
address 192.168.0.139:7788;
meta-disk internal;
}
WHY? appreciate you answering!
FengXue
nandeyijian2002
2007-04-05
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20070405/774fd619/attachment.htm>