Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
/ 2006-10-24 18:03:31 +0200 \ Regis Gras: > I am using > drbd-0.7.21-1.c4 > kernel-module-drbd-2.6.9-42.EL-0.7.21-1.c4 > with the kernel kernel-2.6.9-42.EL on a Centos 4 > > When Primary and Secondary try to synchronize, the Handshake is successfull, but always, the > same computer has Kernel panic, either it whas SyncSource or Synctarget > > > Kernel panic. Not syncing. Fatal exception in interrupt. > > In this case it is SyncTarget > > Handshake successful: DRBD Network Protocol version 74 > Oct 24 17:12:37 bruegel kernel: drbd0: Connection established. > Oct 24 17:12:37 bruegel kernel: drbd0: I am(S): 0:00000001:00000001:00000001:00000001:00 > Oct 24 17:12:37 bruegel kernel: drbd0: Peer(P): 1:00000002:00000002:00000004:00000001:10 > Oct 24 17:12:37 bruegel kernel: drbd0: drbd0_receiver [3382]: cstate WFReportParams --> WFBitMapT > Oct 24 17:12:37 bruegel kernel: drbd0: Secondary/Unknown --> Secondary/Primary > Oct 24 17:12:37 bruegel kernel: drbd0: drbd0_receiver [3382]: cstate WFBitMapT --> SyncTarget > Oct 24 17:12:37 bruegel kernel: drbd0: Resync started as SyncTarget (need to sync 4624136 KB [1156034 bits set]). > At this point: kernel panic, and I have to restart the computer. > > I have this problem always whit the same computer. The same configuration works fine with > other computers. > > I do'nt know if it is > - a hardware problem > - a drbd problem > or a Centos problem > > What do you think about this problem ? my guess is bad ram. but, anyways, capture the output of that panic, and post it. there should be some information in there, including a more or less unreliable stack trace. -- : Lars Ellenberg Tel +43-1-8178292-0 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Schoenbrunner Str. 244, A-1120 Vienna/Europe http://www.linbit.com : __ please use the "List-Reply" function of your email client.