[DRBD-user] Problem with private link and DRBD sync process

Lars Ellenberg Lars.Ellenberg at linbit.com
Mon Nov 27 10:55:35 CET 2006

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


/ 2006-11-27 09:29:23 +0100
\ Saul, Markus:
> > > nagios2:~# ping 192.168.1.1
> > > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> > > >From 192.168.1.2 icmp_seq=1 Destination Host Unreachable
> > 
> > > Thanks for any hints,
> > 
> > what broken network card / driver do you use?
> > [...]
> 
> We already exchanged the whole bunch of plugged in network cards
> (before the above described tests there were similar problems, so I
> thought it would be a good idea to change the NICs), the only thing
> that stayed the same were the on-board ports (all in all we have 3
> interfaces, I tried the private link on different ports, always with
> problems). The new cards are Intel Pro GT 10/100/1000. 
> The drivers used:
> (on-board)
> via_rhine              20900  0
> (PCI cards)
> e1000                  94548  0

these at least do very fine, usually.
does ifconfig report any collisioins/errors?

this is not by chance some 64bit system
with 32bit devices and "too much ram" ?

-- 
: Lars Ellenberg                                  Tel +43-1-8178292-0  :
: LINBIT Information Technologies GmbH            Fax +43-1-8178292-82 :
: Schoenbrunner Str. 244, A-1120 Vienna/Europe   http://www.linbit.com :
__
please use the "List-Reply" function of your email client.



More information about the drbd-user mailing list