Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
hi diego, thank you, it is working now. my firewall was active - so I disabled the "iptables"-service and now, it works ;-) >From: Diego Julian Remolina <diego.remolina at ibb.gatech.edu> >To: "Philipp F." <phunky_p7 at hotmail.com> >CC: drbd-user at linbit.com >Subject: Re: [DRBD-user] DRBD doesn't work >Date: Fri, 17 Mar 2006 07:37:29 -0500 > >Here is one possibility... > >Do your servers have a firewall? > >Have you opened the firewall for the interface used for DRBD or at least >the required port on each one of the machines? > >I use eth3 for drbd and since the interfaces are connected through a >crossover cable, I added this to my iptables to allow all traffice on eth3: > >-A RH-Firewall-1-INPUT -i eth3 -j ACCEPT > >Diego > >Philipp F. wrote: >>hi all, >> >>I made the Tutorial on http://linux-ha.org/DRBD/QuickStart07 step-by-step, >>but DRBD won't work. The Sync doesn't start (that should start after the >>"ssh $left -- 'dmesg | tail ; cat /proc/drbd'"-Command). The Outputs of >>the /proc/drbd (after the Tutorial) are: >> >>node1: >>[root at node1]# cat /proc/drbd >>version: 0.7.17 (api:77/proto:74) >>SVN Revision: 2093 build by root at node1, 2006-03-13 14:26:13 >>0: cs:WFConnection st:Primary/Unknown ld:Consistent >> ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 >> >>node2: >>[root at node2]# cat /proc/drbd >>version: 0.7.17 (api:77/proto:74) >>SVN Revision: 2093 build by root at node1, 2006-03-13 14:26:13 >>0: cs:WFConnection st:Secondary/Unknown ld:Inconsistent >> ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 >> >>I really don't know what's the problem here! Can somebody help me? >> >> >>_______________________________________________ >>drbd-user mailing list >>drbd-user at lists.linbit.com >>http://lists.linbit.com/mailman/listinfo/drbd-user >