Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
drbd at bathnetworks.com wrote:
> Todd,
>
> Thanks for the reply. My answers are in the text. What I can't understand
> is that I did the same on both machines but it is only one that I am
> having trouble with.
>
And the info you sent below is from the machine that is giving the error????
If so this seems exceedingly weird. In that case we'll just have to wait for
one of Guru's to note the message.
> Rob
>
>
>>drbd at bathnetworks.com wrote:
>>
>>>Hi Guys,
>>>
>>>Not sure if this got though as I haven't had a reply.
>>>
>>>I have tried changing disks, deleting the node /dev/hdd on shorty and
>>>recreating as well as deleting the partition etc. I have also
>>>reinstalled
>>>Centos as a desperate measure with the same error. Not sure what to do
>>>next apart from throw the machine in the river.
>>>
>>>Any suggestions?
>>>
>>>
>>>
>>>>Hi,
>>>>
>>>>I'm new to drbd and fairly new to Centos, I am trying to setup a NFS
>>>>server using heartbeat.
>>>>
>>>>I managed to get drbd to work using a simple setup of 2 drives on
>>>>different machines, but when I add a further 2 drives I run into this
>>>>error on.
>>>>
>>>>Starting DRBD resources: [ d0 d1 ioctl(,SET_DISK_CONFIG,) failed:
>>>>Invalid argument
>>>>Lower device is already mounted.
>>>>
>>>>cmd /sbin/drbdsetup /dev/drbd1 disk /dev/hdd1 internal -1 failed!
>>>>
>>
>>At this point... lets gather some info, run the following commands:
>>mount
>
> /dev/hda3 on / type ext3 (rw)
> none on /proc type proc (rw)
> none on /sys type sysfs (rw)
> none on /dev/pts type devpts (rw,gid=5,mode=620)
> none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
> sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
>
>
>>cat /etc/mtab
>
> /dev/hda3 / ext3 rw 0 0
> none /proc proc rw 0 0
> none /sys sysfs rw 0 0
> none /dev/pts devpts rw,gid=5,mode=620 0 0
> none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
> sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
>
>
>>cat /proc/mounts
>
> rootfs / rootfs rw 0 0
> /proc /proc proc rw,nodiratime 0 0
> none /dev tmpfs rw 0 0
> /dev/root / ext3 rw 0 0
> none /dev tmpfs rw 0 0
> /proc /proc proc rw,nodiratime 0 0
> /proc/bus/usb /proc/bus/usb usbfs rw 0 0
> /sys /sys sysfs rw 0 0
> none /dev/pts devpts rw 0 0
> none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
> sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
>
>
>> From what you have indicated I expect all of them to match (at least
>>with
>>respect to /dev/hdd1).
>>
>>Guesses at what might be going on:
>>1) /dev/hdd1 was created in a way that LVM thinks it should manage the
>>partition, so LVM mounts it.
>>
>>2) the tool you created the partition with put it in the automount config
>>(/etc/auto.*) ???
>
>
> Neither /etc/auto.master or /etc/auto.misc have anything that is not
> commented out.
>
>>Also IIRC with drbd 7.x you should be using drbdadm not drbdsetup (Note
>>you
>>don't show the command you used, just the error message, which as far as I
>>know may have been generated by drbdadm).
>
>
> I'm using:
> rpm -q drbd
> drbd-0.7.17-1.c4
>
> I get the error when starting drbd. I am using the rpm from the Centos
> repo which provides a kernel module for my kernel. I have also installed
> the drbd-heartbeat group rpms.
>
> I am starting drbd with the script:
> /etc/rc.d/init.d/drbd start
>
> If I use drbdadm I get:
>
> drbdadm up drbd1
> ioctl(,SET_DISK_CONFIG,) failed: Invalid argument
> Lower device is already mounted.
> Command 'drbdsetup /dev/drbd1 disk /dev/hdd1 internal -1' terminated with
> exit code 20
>
>
>
>>>>As far as I can tell, hdd1 is not mounted, there is no reference to it
>>>>in
>>>>fstab etc. - It is a new partition that I created just before running
>>>>drbd
>>>>and it is not listed in response to mount.
>>>>
>>
>>How did you create it?
>
>
> Parted.
>
>
>>>>The simple drbd.conf I am trying is below.
>>>>
>>>>Any suggestions on how to fix this would be gratefully received.
>>>>
>>>>Rob
>>>>
>>>>resource drbd0 {
>>>> protocol C;
>>>> syncer {
>>>> rate 12M;
>>>> }
>>>>
>>>> on fs1.bathnetworks.local {
>>>> device /dev/drbd0;
>>>> disk /dev/hde1;
>>>> address 10.0.0.1:7788;
>>>> meta-disk internal;
>>>> }
>>>>
>>>> on shorty.bathnetworks.local {
>>>> device /dev/drbd0;
>>>> disk /dev/hdc1;
>>>> address 10.0.0.2:7788;
>>>> meta-disk internal;
>>>> }
>>>>}
>>>>resource drbd1 {
>>>> protocol C;
>>>> syncer {
>>>> rate 12M;
>>>> }
>>>>
>>>> on fs1.bathnetworks.local {
>>>> device /dev/drbd1;
>>>> disk /dev/hdf1;
>>>> address 10.0.0.1:7789;
>>>> meta-disk internal;
>>>> }
>>>>
>>>> on shorty.bathnetworks.local {
>>>> device /dev/drbd1;
>>>> disk /dev/hdd1;
>>>> address 10.0.0.2:7789;
>>>> meta-disk internal;
>>>> }
>>>>}
>>>>
>>
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter