Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi, I am trying to set up drbd with two nodes. After setting up drbd, and
executing drbdadm up all on both the nodes , i executed "drbdadm --
--do-what-I-say primary all" on server1 to make it primary. It started an
initial sync, and i left it overnight to complete. when i came back in the
morning, and executed drbdadm -- connect all on server 1, it gives me the
following error
test1:~ # drbdadm -- connect all
Child process does not terminate!
Exiting.
the cat /proc/drbd on both machines is listed below
test1:~ # cat /proc/drbd
version: 0.7.14 (api:77/proto:74)
SVN Revision: 1989 build by root at test1, 2006-11-30 11:03:07
0: cs:BrokenPipe st:Secondary/Unknown ld:Inconsistent
ns:4568 nr:0 dw:0 dr:12676 al:0 bm:196 lo:0 pe:22 ua:2025 ap:0
test2:~ # cat /proc/drbd
version: 0.7.18 (api:78/proto:74)
SVN Revision: 2186 build by lmb at chip, 2006-05-04 17:08:27
0: cs:WFConnection st:Secondary/Unknown ld:Inconsistent
ns:0 nr:198672496 dw:198672496 dr:0 al:0 bm:12126 lo:0 pe:0 ua:0 ap:0
the config snippet is as below
resource r0 {
#
protocol C;
incon-degr-cmd "halt -f";
startup {
#
degr-wfc-timeout 120; # 2 minutes.
}
disk {
on-io-error detach;
size 300G;
}
net {
}
syncer {
#
rate 100M;
#
group 1;
al-extents 257;
}
on test1 {
device /dev/drbd0;
disk /dev/md0;
address 192.168.2.61:7788;
meta-disk internal;
}
on test2 {
device /dev/drbd0;
disk /dev/md0;
address 192.168.2.62:7788;
meta-disk internal;
}
}
==--=-=-=--=-=-=
test1:~ # dmesg | tail
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 198676719
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=198676735,
high=11, low=14127359, sector=198676727
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 198676727
hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdd: dma_intr: error=0x40 { UncorrectableError }, LBAsect=198676735,
high=11, low=14127359, sector=198676735
ide: failed opcode was: unknown
end_request: I/O error, dev hdd, sector 198676735
=-=-=-=-=
--
Regards
M Kamran Nisar,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20061206/112abadf/attachment-0001.htm>