[DRBD-user] Initial sync speed about 4K

[David]

What have you got in drbd.conf under here:

<snip>

  syncer {
    rate 10M;
  }

</snip>

David.

> -----Original Message-----
> From: drbd-user-bounces at lists.linbit.com
> [mailto:drbd-user-bounces at lists.linbit.com]On Behalf Of Jason W. Allen
> Sent: Monday, 8 August 2005 11:21 PM
> To: drbd-user at lists.linbit.com
> Subject: [DRBD-user] Initial sync speed about 4K
>
>
> Hello all,
>
> I have drbd up an running (sort of) on my lab systems.  Both systems are
> running debian Sarge Kernel 2.4.27.  But, I'm only getting 4K/sec for the
> sync.  I've left it running overnight and it never got more then 3-4%
> finished.
>
> So I enabled my second network cards on both machines, crossover connected
> them and configured drbd to use them.  Still same problem:
>
> /# cat /proc/drbd
> version 0.7.10 (api:77/proto:74)
> SVN Revision: 1743 build by phil at mescak, 2005-01-31 12:22:07
>  0: cs:SyncSource st:Primary/Secondary Id:Consistant
>     ns:3600 nr:0 dw:0 dr:3624 al:0 bm:0 lo:6 pe:6 ua:6 ap:0
>         [>...................] sync'ed:  0.2% (4765/4769)M
>         finish: 27:06:43 speed: 4 (4) K/sec
>  1: cs:Unconfigured
>  2: cs:Unconfigured
>  3: cs:Unconfigured
>  4: cs:Unconfigured
>
> Where do I start looking for this problem?  Is this a config issue, or is
> this hardware related?  I get the same number from either set of network
> cards.
>
> --Jason W. Allen
>   Director of System Solutions
>   MPGis Inc.
>   (610) 670-7600  ext.207
>   fax (610) 670-7700
>   jallen at mpgis.net
>
>
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>
> !DSPAM:42f76304140191298019053!
>
>