Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Am Wednesday 10 March 2004 16:22 schrieb Csan: > Thanks, Philipp! > > ...ok and this is the point when I will try to upgrade to this final > version. If it fails, I'll fall back to the current "working" version and > monitor 0.7 development. > > The main question to you all before I jump into it: are there any caveats > for the upgrade from version *0.6.2*? Is this upgrade path recommended? > 0.6.2 (api:61/proto:62) 0.6.12 (api:64/proto:62) You have to make shure to update kernel module *and* drbdsetup. since the ioctl() interface changed in the mean time. Even a rolling upgrade is possible. > Meaning: should I change anything in the DRBD world of my server besides > the recompiled kernel module (kernel 2.4.20 with dm patch)? > > Details (one of the three identical devices): > > # drbdsetup /dev/nb0 show > Lower device: 08:03 (/dev/sda3) > Disk options: > disk-size = 29318625 KB > do-panic > Local address: 192.168.111.2:7778 > Remote address: 192.168.111.1:7778 > Wire protocol: A > Net options: > timeout = 4.0 sec > sync-min = 200 KB/sec > sync-max = 102400 KB/sec > sync-nice = -20 > tl-size = 5000 > connect-int = 5 sec > ping-int = 5 sec > > (I will also wait for the debian package update before I do anything) > > My current version is: > version: 0.6.2 (api:61/proto:62) > > Additional info: > All the devices run without a secondary node at the moment. So I will add > the node at the same time I upgrade the drbd on primary. > > Thanks. > -Philipp -- : Dipl-Ing Philipp Reisner Tel +43-1-8178292-50 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Schönbrunnerstr 244, 1120 Vienna, Austria http://www.linbit.com :