[DRBD-user] DRBD9 not building on PVE6.1
Gianni Milo
gianni.milo22 at gmail.com
Thu Dec 5 11:56:33 CET 2019
Thanks for the suggestions, will try them. This is a test system, so
there's no urgency ...
G.
On Thu, 5 Dec 2019 at 09:27, Christoph Böhmwalder <
christoph.boehmwalder at linbit.com> wrote:
> On 05.12.19 08:51, Gianni Milo wrote:
> > Hello,
> >
> > PVE 6.1 was released recently and it's using kernel 5.3.10-1-pve. It
> looks like drbd9 is not building properly on this kernel (spatch?). Mind
> having a look please ?
> >
> > Thanks,
> > G
> >
> > make: Entering directory '/var/lib/dkms/drbd/9.0.21-1/build/src/drbd'
> >
> > Calling toplevel makefile of kernel source tree, which I believe is
> in
> > KDIR=/lib/modules/5.3.10-1-pve/build
> >
> > make -C /lib/modules/5.3.10-1-pve/build
> M=/var/lib/dkms/drbd/9.0.21-1/build/src/drbd modules
> > COMPAT alloc_workqueue_takes_fmt
> > COMPAT before_4_13_kernel_read
> > COMPAT blkdev_issue_zeroout_discard
> > COMPAT drbd_release_returns_void
> > COMPAT genl_policy_in_ops
> > COMPAT have_SHASH_DESC_ON_STACK
> > COMPAT have_WB_congested_enum
> > COMPAT have_allow_kernel_signal
> > COMPAT have_atomic_dec_if_positive_linux
> > COMPAT have_atomic_in_flight
> > COMPAT have_bd_claim_by_disk
> > COMPAT have_bd_unlink_disk_holder
> > COMPAT have_bio_bi_bdev
> > COMPAT have_bio_bi_error
> > COMPAT have_bio_bi_opf
> > COMPAT have_bio_bi_status
> > COMPAT have_bio_clone_fast
> > COMPAT have_bio_flush
> > COMPAT have_bio_free
> > COMPAT have_bio_op_shift
> > COMPAT have_bio_rw
> > COMPAT have_bio_set_op_attrs
> > COMPAT have_bioset_create_front_pad
> > COMPAT have_bioset_init
> > COMPAT have_bioset_need_bvecs
> > COMPAT have_blk_check_plugged
> > COMPAT have_blk_qc_t_make_request
> > COMPAT have_blk_queue_flag_set
> > COMPAT have_blk_queue_merge_bvec
> > COMPAT have_blk_queue_plugged
> > COMPAT have_blk_queue_split_q_bio
> > COMPAT have_blk_queue_split_q_bio_bioset
> > COMPAT have_blk_queue_write_cache
> > COMPAT have_blkdev_get_by_path
> > COMPAT have_d_inode
> > COMPAT have_file_inode
> > COMPAT have_generic_start_io_acct_q_rw_sect_part
> > COMPAT have_generic_start_io_acct_rw_sect_part
> > COMPAT have_genl_family_parallel_ops
> > COMPAT have_ib_cq_init_attr
> > COMPAT have_idr_alloc
> > COMPAT have_idr_is_empty
> > COMPAT have_inode_lock
> > COMPAT have_ktime_to_timespec64
> > COMPAT have_kvfree
> > COMPAT have_max_send_recv_sge
> > COMPAT have_netlink_cb_portid
> > COMPAT have_nla_nest_start_noflag
> > COMPAT have_nla_parse_deprecated
> > COMPAT have_nla_put_64bit
> > COMPAT have_pointer_backing_dev_info
> > COMPAT have_prandom_u32
> > COMPAT have_proc_create_single
> > COMPAT have_ratelimit_state_init
> > COMPAT have_rb_augment_functions
> > COMPAT have_refcount_inc
> > COMPAT have_req_hardbarrier
> > COMPAT have_req_noidle
> > COMPAT have_req_nounmap
> > COMPAT have_req_op_write
> > COMPAT have_req_op_write_same
> > COMPAT have_req_op_write_zeroes
> > COMPAT have_req_prio
> > COMPAT have_req_write
> > COMPAT have_req_write_same
> > COMPAT have_security_netlink_recv
> > COMPAT have_shash_desc_zero
> > COMPAT have_signed_nla_put
> > COMPAT have_simple_positive
> > COMPAT have_struct_bvec_iter
> > COMPAT have_struct_kernel_param_ops
> > COMPAT have_time64_to_tm
> > COMPAT have_timer_setup
> > COMPAT have_void_make_request
> > COMPAT hlist_for_each_entry_has_three_parameters
> > COMPAT ib_alloc_pd_has_2_params
> > COMPAT ib_device_has_ops
> > COMPAT ib_query_device_has_3_params
> > COMPAT kmap_atomic_page_only
> > COMPAT need_make_request_recursion
> > COMPAT queue_limits_has_discard_zeroes_data
> > COMPAT rdma_create_id_has_net_ns
> > COMPAT sock_create_kern_has_five_parameters
> > COMPAT sock_ops_returns_addr_len
> > UPD
> /var/lib/dkms/drbd/9.0.21-1/build/src/drbd/compat.5.3.10-1-pve.h
> > UPD /var/lib/dkms/drbd/9.0.21-1/build/src/drbd/compat.h
> > ERROR: spatch not recent enough, need spatch version >= 1.0.8
> > make[3]: *** [Makefile:177:
> drbd-kernel-compat/cocci_cache/fefffd1bac6169c15393f8aff1445926/compat.patch]
> Error 1
> > make[2]: *** [/var/lib/dkms/drbd/9.0.21-1/build/src/drbd/Kbuild:136:
> /var/lib/dkms/drbd/9.0.21-1/build/src/drbd/drbd-kernel-compat/compat.patch]
> Error 2
> > make[1]: *** [Makefile:1655:
> _module_/var/lib/dkms/drbd/9.0.21-1/build/src/drbd] Error 2
> > make: *** [Makefile:126: kbuild] Error 2
> > make: Leaving directory '/var/lib/dkms/drbd/9.0.21-1/build/src/drbd'
> >
> > _______________________________________________
> > Star us on GITHUB: https://github.com/LINBIT
> > drbd-user mailing list
> > drbd-user at lists.linbit.com
> > https://lists.linbit.com/mailman/listinfo/drbd-user
> >
>
> Hi,
>
> In 9.0.21-1 we introduced a version check for coccinelle, since we use
> some pretty new features and the whole system falls apart pretty quickly if
> spatch is too old. Previously, it would fall back to using "SPAAS", our
> "spatch as a service" service (i.e. build the patches on LINBIT servers).
> This behavior has been changed, and it now aborts if spatch is too old.
> The reasoning behind this is that a user presumably explicitly doesn't want
> to call any online services if they have their own spatch installed. We're
> discussing this internally and may or may not have some different behavior
> in the next release.
>
> In the meantime, a quick fix would be to upgrade your local spatch
> installation via the PPA[1] (if you want to use your local version), or
> temporarily uninstall spatch (if you want to use SPAAS).
>
> By the way: If you're using LINSTOR with PVE6.1, there is currently a bug
> where it's not possible to create LINSTOR resources using the Proxmox
> plugin. There will be a new LINSTOR release soon (possibly today) to
> address this.
>
> --
> Christoph Böhmwalder
> LINBIT | Keeping the Digital World Running
> DRBD HA — Disaster Recovery — Software defined Storage
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20191205/656b51ce/attachment-0001.htm>
More information about the drbd-user
mailing list