Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
This scenario was hipotethical, I don't have sde1 on server 5 yet... hehe I just have 4 servers that need to replicate a partition or a fisical disk to the backup server (server 5). I will take your sugestion and bring it to my board meeting, regarding contract the support plan. Also I will create a 1 to 1 DRBD config, and try to add after another node to this. Thank you for your assistance Adam, I really appreciate it. Fernando de Campos Machado Oracle Database Administrator / Infrastructure Analyst fernandocmachado at yahoo.com.br +55 (19) 99199-2028 <http://www.linkedin.com/in/fernandocamposmachado/> <skype:fernandocmachado?userinfo> <http://instagram.com/fernandocmachado> De: Adam Goryachev [mailto:mailinglists at websitemanagers.com.au] Enviada em: segunda-feira, 13 de novembro de 2017 11:09 Para: fernandocmachado at yahoo.com.br; drbd-user at lists.linbit.com Assunto: Re: RES: [DRBD-user] Data Block Changes replication with 5 servers On 13/11/17 21:59, fernandocmachado at yahoo.com.br <mailto:fernandocmachado at yahoo.com.br> wrote: Hello Adam, Thank you for replying me on this matter. I was trying to use 8.4, but since it didn't work, I tried with 9.0, but no sucess also. I want only 1 copy of the data blocks for each server to backup server. I was figuring out this model, but I couldn't apply it: Server 1: sdb1 - 1TB Server 2: sdc1 - 1TB Server 3: sdd1 - 1TB Server 4: sde1 - 1TB Server 5 (backup for the 4 servers) 4 disks: Sdb1 - 1TB Sdc1 - 1TB Sdd1 - 1TB Sde1 - 1TB I was not able to configure as this, because I don't the knowledge to do it. I got only 1 to 1, but I need 4 to 1. You have a choice to use either 8.4 or 9.0, given that either will work based on your above requirements. However, do you really have a sde1 in Server4 ? Are you sure this isn't sda1 or sdb1? How many drives do you have in each of the 4 servers? You can have: Server1 sdb1 sync with Server5 sdb1 Server2 sdb1 sync with Server5 sdc1 Server3 sdb1 sync with Server5 sdd1 Server4 sdb1 sync with Server5 sde1 ie, the disk device name does not need to match. Please follow the excellent documentation on how to install and configure DRBD. Start with just server1 and server5. If you get stuck, then post your configs, and a complete description of your servers (OS, versions, hardware, etc), as well as any log files that are relevant. Then we might be able to assist you further. However, please take the time to read and understand the documentation, it will help you now, and will definitely help you in the future when something goes wrong. Alternatively, contact linbit and buy a support contract, their help is awesome, and having an expert available when something goes wrong is very helpful (PS, just a happy customer, I don't get paid from linbit). Regards, Adam -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20171113/3262a310/attachment.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 686 bytes Desc: not available URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20171113/3262a310/attachment.png> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 878 bytes Desc: not available URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20171113/3262a310/attachment-0001.png> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/png Size: 848 bytes Desc: not available URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20171113/3262a310/attachment-0002.png>