Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi All,
In a 3 node Proxmox 4.4 with DRBD9, with vm100, vm104 and vm105
starting at boot in HA.
After some update (now drbdmanage 0.99.2) I have some problems.
Starting system I have vm100 starting on mpve3 (node 3) and vm104 and
vm105 not starting.
Those are the output of drbd-overview and drbdsetup status on servers:
root at mpve3:~# drbd-overview
0:.drbdctrl/0 Connected(3*)
Prim(mpve3)/Seco(mpve1,mpve2) UpTo(mpve3)/UpTo(mpve1,mpve2)
1:.drbdctrl/1 Connected(3*)
Prim(mpve3)/Seco(mpve2,mpve1) UpTo(mpve3)/UpTo(mpve2,mpve1)
100:vm-100-disk-1/0 Conn(mpve3)/C'ng(mpve1,mpve2)
Prim(mpve3)/Unkn(mpve1,mpve2) UpTo(mpve3)/DUnk(mpve2,mpve1)
101:vm-101-disk-1/0 Conn(mpve3)/C'ng(mpve1,mpve2)
Seco(mpve3)/Unkn(mpve1,mpve2) UpTo(mpve3)/DUnk(mpve1,mpve2)
102:vm-102-disk-1/0 Conn(mpve3)/C'ng(mpve1,mpve2)
Seco(mpve3)/Unkn(mpve2,mpve1) UpTo(mpve3)/DUnk(mpve2,mpve1)
103:vm-103-disk-1/0 Conn(mpve3)/C'ng(mpve2,mpve1)
Seco(mpve3)/Unkn(mpve1,mpve2) UpTo(mpve3)/DUnk(mpve1,mpve2)
104:vm-104-disk-1/0 Conn(mpve3)/C'ng(mpve1,mpve2)
Seco(mpve3)/Unkn(mpve1,mpve2) UpTo(mpve3)/DUnk(mpve1,mpve2)
105:vm-105-disk-1/0 Conn(mpve3)/C'ng(mpve1,mpve2)
Seco(mpve3)/Unkn(mpve2,mpve1) UpTo(mpve3)/DUnk(mpve1,mpve2)
root at mpve3:~# drbdsetup status vm-105-disk-1 --verbose --statistics
vm-105-disk-1 node-id:1 role:Secondary suspended:no
write-ordering:flush
volume:0 minor:105 disk:UpToDate
size:153092096 read:756 written:0 al-writes:0 bm-writes:0
upper-pending:0 lower-pending:0 al-suspended:no
blocked:no
mpve1 node-id:0 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:3396 pending:0 unacked:0
mpve2 node-id:2 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:3396 pending:0 unacked:0
root at mpve3:~# drbdsetup status vm-104-disk-1 --verbose --statistics
vm-104-disk-1 node-id:1 role:Secondary suspended:no
write-ordering:flush
volume:0 minor:104 disk:UpToDate
size:153092096 read:636 written:0 al-writes:0 bm-writes:0
upper-pending:0 lower-pending:0 al-suspended:no
blocked:no
mpve1 node-id:0 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:3156 pending:0 unacked:0
mpve2 node-id:2 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:3156 pending:0 unacked:0
root at mpve3:~# drbdsetup status vm-100-disk-1 --verbose --statistics
vm-100-disk-1 node-id:1 role:Primary suspended:no
write-ordering:flush
volume:0 minor:100 disk:UpToDate
size:33554432 read:123626 written:4260 al-writes:14 bm-writes:0
upper-pending:0 lower-pending:0 al-suspended:no
blocked:no
mpve1 node-id:0 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:30282464 pending:0 unacked:0
mpve2 node-id:2 connection:Connecting role:Unknown congested:no
volume:0 replication:Off peer-disk:DUnknown resync-suspended:no
received:0 sent:0 out-of-sync:4844 pending:0 unacked:0
root at mpve2:~# drbd-overview
0:.drbdctrl/0 Connected(3*)
Seco(mpve2,mpve1)/Prim(mpve3) UpTo(mpve2)/UpTo(mpve3,mpve1)
1:.drbdctrl/1 Connected(3*)
Seco(mpve2,mpve1)/Prim(mpve3) UpTo(mpve2)/UpTo(mpve1,mpve3)
101:vm-101-disk-1/0 Conn(mpve2,mpve3)/C'ng(mpve1)
Seco(mpve3,mpve2)/Unkn(mpve1) UpTo(mpve2)/DUnk(mpve1)/UpTo(mpve3)
root at mpve2:~# drbd-overview
0:.drbdctrl/0 Connected(3*)
Seco(mpve2,mpve1)/Prim(mpve3) UpTo(mpve2)/UpTo(mpve1,mpve3)
1:.drbdctrl/1 Connected(3*)
Seco(mpve2,mpve1)/Prim(mpve3) UpTo(mpve2)/UpTo(mpve3,mpve1)
101:vm-101-disk-1/0 Conn(mpve3,mpve2)/C'ng(mpve1)
Seco(mpve3,mpve2)/Unkn(mpve1) UpTo(mpve2)/DUnk(mpve1)/UpTo(mpve3)
root at mpve1:~# drbd-overview
0:.drbdctrl/0 Connected(3*) Seco(mpve2,mpve1)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve3,mpve2)
1:.drbdctrl/1 Connected(3*) Seco(mpve1,mpve2)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve3,mpve2)
root at mpve1:~# drbd-overview
0:.drbdctrl/0 Connected(3*) Seco(mpve2,mpve1)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve3,mpve2)
1:.drbdctrl/1 Connected(3*) Seco(mpve2,mpve1)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve2,mpve3)
root at mpve1:~# drbd-overview
0:.drbdctrl/0 Connected(3*) Seco(mpve1,mpve2)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve3,mpve2)
1:.drbdctrl/1 Connected(3*) Seco(mpve1,mpve2)/Prim(mpve3)
UpTo(mpve1)/UpTo(mpve2,mpve3)
What I have to do to restore the correct system?
Thanks,
Michele