Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi again, In fact there is other problems, when I migrate a VM on another node, it's fail with this error message : sept. 05 16:26:32 starting migration of VM 100 to node 'dmz-pve2' (192.168.0.20) sept. 05 16:26:32 copying disk images sept. 05 16:26:32 starting VM 100 on remote node 'dmz-pve2' sept. 05 16:26:34 start failed: command '/usr/bin/kvm -id 100 -chardev 'socket,id=qmp,path=/var/run/qemu-server/100.qmp,server,nowait' -mon 'chardev=qmp,mode=control' -pidfile /var/run/qemu-server/100.pid -daemonize -smbios 'type=1,uuid=644673aa-fb7e-4b11-9fa3-2f3ec9098235' -name vm100 -smp '4,sockets=2,cores=2,maxcpus=4' -nodefaults -boot 'menu=on,strict=on,reboot-timeout=1000' -vga cirrus -vnc unix:/var/run/qemu-server/100.vnc,x509,password -cpu kvm64,+lahf_lm,+sep,+kvm_pv_unhalt,+kvm_pv_eoi,enforce -m 4096 -k fr -device 'pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f' -device 'pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e' -device 'piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2' -device 'usb-tablet,id=tablet,bus=uhci.0,port=1' -device 'virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3' -iscsi 'initiator-name=iqn.1993-08.org.debian:01:96495c6512a9' -drive 'if=none,id=drive-ide2,media=cdrom,aio=threads' -device 'ide-cd,bus=ide.1,unit=0,drive=drive-ide2,id=ide2,bootindex=200' -drive 'file=/dev/drbd/by-res/vm-100-disk-2/0,if=none,id=drive-virtio0,cache=writethrough,format=raw,aio=threads,detect-zeroes=on' -device 'virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100' -netdev 'type=tap,id=net0,ifname=tap100i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on' -device 'virtio-net-pci,mac=B6:35:60:34:BD:DD,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300' -machine 'type=pc-i440fx-2.6' -incoming unix:/run/qemu-server/100.migrate -S' failed: exit code 1 sept. 05 16:26:34 ERROR: online migrate failure - command '/usr/bin/ssh -o 'BatchMode=yes' root at 192.168.0.20 qm start 100 --skiplock --migratedfrom dmz-pve3 --stateuri unix --machine pc-i440fx-2.6' failed: exit code 255 sept. 05 16:26:34 aborting phase 2 - cleanup resources sept. 05 16:26:34 migrate_cancel sept. 05 16:26:34 ERROR: migration finished with problems (duration 00:00:02) TASK ERROR: migration problems Proxmox search for /dev/drbd/by-res/vm-100-disk-2/0 which is not present (/dev/drbdpool/vm-100-disk-2_00 exist). If I do: mkdir /dev/drbd/by-res/vm-100-disk-2 cd /dev/drbd/by-res/vm-100-disk-2 ln -s ../../../drbd101 0 My virtual machine can start. How to have /dev/drbd/by-res automatically filled by resources for all VMs ? PS : I do some apt-get purge ` deborphan --guess-all ` (until nothing need to be purged) on all Proxmox nodes as I do for all my Debian servers. Thanks in advance. Le 05/09/2016 à 12:53, Jean-Daniel TISSOT a écrit : > > Hi Robert, > > Thanks a lot. This export solve my problem. A drbdadm adjust all and after a drbdadm status show me good results. > > > Le 05/09/2016 à 11:54, Robert Altnoeder a écrit : >> On 09/02/2016 06:05 PM, Jean-Daniel TISSOT wrote: >>> Hi list, >>> >>> I remark i have a file /var/lib/drbd.d/drbdmanage_vm-100-disk-2.res [...] >>> If i reboot a node, this file disappear on this node [...] >>> [...] if i do drbdadm connect vm-100-disk-2 i receive : >>> 'vm-100-disk-2' not defined in your config (for this host). >>> >> The DRBD resources on ProxMox with DRBD9 are managed by drbdmanage instead of just by drbdadm. >> You can run: >> drbdmanage export vm-100-disk-2 >> which will recreate the configuration file in /var/lib/drbd.d for use with drbdadm >> >> This command will also implicitly start the drbdmanage server if it is not yet started (otherwise, drbdmanage startup can be used to start the drbdmanage server, which also starts all resources managed by drbdmanage). >> >> Apart from that, since the resource appears to be running, but is marked as Outdated and StandAlone, there might also be something wrong with the resource itself. If the resource does not reconnect/resync after a 'drbdadm adjust' command, the system log should be checked for messages regarding the state of that resource (such as e.g. a split-brain alert) >> >> -- >> Robert Altnoeder >> DRBD - Corosync - Pacemaker >> +43 (1) 817 82 92 - 0 <tel:43181782920> >> robert.altnoeder at linbit.com <mailto:robert.altnoeder at linbit.com> >> >> DRBD® and LINBIT® are registered trademarks of LINBIT, Austria. >> >> >> >> _______________________________________________ >> drbd-user mailing list >> drbd-user at lists.linbit.com >> http://lists.linbit.com/mailman/listinfo/drbd-user > > -- > Bien cordialement, Jean-Daniel TISSOT <http://chrono-environnement.univ-fcomte.fr/spip.php?article457> > Administrateur Systèmes et Réseaux > Tel: +33 3 81 666 440 Fax: +33 3 81 666 568 > > Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/> > 16, Route de Gray > 25030 BESANÇON Cédex > > Plan et Accès <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c> -- Bien cordialement, Jean-Daniel TISSOT <http://chrono-environnement.univ-fcomte.fr/spip.php?article457> Administrateur Systèmes et Réseaux Tel: +33 3 81 666 440 Fax: +33 3 81 666 568 Laboratoire Chrono-environnement <http://chrono-environnement.univ-fcomte.fr/> 16, Route de Gray 25030 BESANÇON Cédex Plan et Accès <https://mapsengine.google.com/map/viewer?mid=zjsxW4ZzZPLY.kp2qPHUBD45c> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20160905/a090b932/attachment.htm>