Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hello all new to the group,
DRBD9 was working just fine. I moved servers to the datacenter after a few weeks of testing. I loaded two VMs and I thought they had synced. I guess they didn’t. The primary is fine. I have since added new images to the primary but not being passed. I guess due to the error on the two resources in diskless state. The secondary in this state:
VE1 is primary
VE2 is secondary
VE1> says connecting for all resources, but volumes are UpToDate. Guess it is due to the errors on the secondary.
VE2> drbdadm status
.drbdctrl role:Secondary
volume:0 disk:UpToDate
volume:1 disk:UpToDate
ve1 role:Primary
volume:0 peer-disk:UpToDate
volume:1 peer-disk:UpToDate
vm-102-disk-1 role:Secondary
disk:Diskless
vm-107-disk-1 role:Secondary
disk:Diskless
I tried to disconnect and adjust, disconnect and —force down, up. I just get this error:
VE2: adjust
open(/dev/drbdpool/vm-102-disk-1_00) failed: No such file or directory
Command 'drbdmeta 100 v09 /dev/drbdpool/vm-102-disk-1_00 internal apply-al' terminated with exit code 20
open(/dev/drbdpool/vm-107-disk-1_00) failed: No such file or directory
Command 'drbdmeta 101 v09 /dev/drbdpool/vm-107-disk-1_00 internal apply-al' terminated with exit code 20
VE2: connect all
.drbdctrl: Failure: (125) Device has a net-config (use disconnect first)
Command 'drbdsetup connect .drbdctrl 0' terminated with exit code 10
vm-102-disk-1: Failure: (162) Invalid configuration request
additional info from kernel:
unknown connection
Command 'drbdsetup connect vm-102-disk-1 1' terminated with exit code 10
vm-107-disk-1: Failure: (162) Invalid configuration request
additional info from kernel:
unknown connection
Command 'drbdsetup connect vm-107-disk-1 1' terminated with exit code 10
I don’t have any resources on the secondary. So If there is a way to just have it drop it all and pull from primary again that works. Or how can I repair this state so I can get the secondary to pull the other images.
Thanks again for any advice,
Jason
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20160512/571c87c5/attachment.htm>