Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Sorry, forgot to include the list in my reply.
---------- Forwarded message ----------
From: Igor Cicimov <icicimov at gmail.com>
Date: Mon, Feb 22, 2016 at 9:33 PM
Subject: Re: [DRBD-user] DRBD9 drbdadm complains about fencing being in
wrong section
To: Roland Kammerer <roland.kammerer at linbit.com>
Hi Roland,
On Thu, Feb 18, 2016 at 8:03 PM, Roland Kammerer <roland.kammerer at linbit.com
> wrote:
> On Thu, Feb 18, 2016 at 10:37:58AM +1100, Igor Cicimov wrote:
> > On Wed, Feb 17, 2016 at 8:18 PM, Roland Kammerer <
> roland.kammerer at linbit.com
> > > wrote:
> >
> > > On Wed, Feb 17, 2016 at 04:20:12PM +1100, Igor Cicimov wrote:
> > > > Hi,
> > > >
> > > > I'm testing 9.0.1.1 installed from git and have a resource with
> fencing
> > > in
> > > > the disk section:
> > > >
> > > > disk {
> > > > on-io-error detach;
> > > > fencing resource-and-stonith;
> > > > }
> > >
> > > It belongs to net{}, and yes, the man page is outdated, I will fix
> that.
> > >
> > >
> > Thanks Roland that worked. By the way I'm facing another issue when
> > starting the service:
> >
> > # service drbd start
> > * Starting DRBD
> > resources
> > [
> > create res: vg1
> > prepare disk: vg1
> > adjust disk: vg1
> > prepare net: vg1
> > adjust peer_devices: vg1
> > attempt to connect: vg1
> > ]
> > ...drbdadm: Unknown command 'sh-b-pri'
>
> Too old version of drbd-utils (which provides the init script)?
>
Nope, latest install from git as it can be seen in the output of the
drbdadm version in my initial post.
I'm also seeing another discrepancy between the utility and what is in the
docs:
# drbdadm status vg1 --verbose --statistics
drbdadm: unrecognized option '--statistics'
try 'drbdadm help'
where '--statistics' is suppose to be a valid option according to the docs.
> 'sh-b-pri' was dropped, see the corresponding comment in the init
> script:
> # Become primary if configured
> # Currently, this is necessary for drbd8
> # drbd9 supports automatic promote and removes the
> # "sh-b-pri" command.
> $DRBDADM sh-b-pri all || true
>
> >
> > although drbdadm tells me that all is fine:
> >
> > # drbdadm status
> > vg1 role:Primary
> > disk:UpToDate
> > drbd02 role:Primary
> > peer-disk:UpToDate
>
> Looks good.
>
> >
> > Now this is a problem since I can't set drbd under pacemaker control:
> >
> > Failed actions:
> > p_drbd_vg1_start_0 (node=drbd01, call=9, rc=1, status=Timed Out,
> > last-rc-change=Thu Feb 18 10:07:43 2016
> > , queued=20004ms, exec=1ms
> > ): unknown error
> > p_drbd_vg1_start_0 (node=drbd02, call=9, rc=1, status=Timed Out,
> > last-rc-change=Thu Feb 18 10:07:43 2016
> > , queued=20005ms, exec=0ms
> > ): unknown error
> >
> > I've been running this kind of setups with 8.4.4 with no issues. Has
> > something changed around drbd management in version 9 or is it just
> > something wrong with the initd script?
>
> AFAIK you should not mix the drbd service with pacemaker anyways. Choose
> one, pacemaker. Pacemaker is really not my field of expertise, so
> somebody else has to jump in here.
>
>
I'm not mixing them drbd is set to not autostart and should be under
pacemaker control...eventually.
> > Finally thanks for the drbdmanage pointer I'll do some research about it
> (I
> > think I saw some presentation of yours on the web). I don't see it
> > installed on my system (Ubuntu 14.04.4 LTS) so guess it is not packaged
> > with drbd-utils but is a separate toll. I have a question though, since I
> > have done the config already manually, is the drbdmanage going to take
> over
> > based on already existing configuration or I will need to reconfigure
> > everything all over again?
>
> It is a separate package and not part of drbd-utils. AFAIR downstream
> Debian/Ubuntu did not pick it up yet. For Ubuntu there is a PPA if you
> want to try it:
>
> https://launchpad.net/~linbit/+archive/ubuntu/linbit-drbd9-stack
>
> Currently there is no importing of manually crafted res files. To me, it
> is actually very low on the feature list I care about. Depending on the
> size/time for resync/... it is probably the easiest if you start from
> scratch, but then it is really easy:
>
> node1-n:$ vgcreate drbdpool ...
> node1:$ drbdmanage init
> node1:$ drbdmange add-node node2 IP
> node1:$ drbdmange new-volume foo 10G --deploy 2
>
> http://drbd.linbit.com/users-guide-9.0/ch-admin-drbdmanage.html
>
> And you are done, lvm configured, DRBD on top of it.
>
> Regards, rck
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20160222/b2c37075/attachment.htm>