Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
On Mon, Oct 26, 2015 at 12:18 AM, Punit Vara <punitvara at gmail.com> wrote:
> Add and remove space as per coding style for loops,comma , open and
> close parenthesis.It also removes whitespace.
>
> This patch is to the ataflop.c file that fixes up following ERRORs
> reported by checkpatch:
>
> - space prohibited before that close parenthesis ')'
> - space prohibited after that open parenthesis '('
> - trailing whitespace
> - space required after that ',' (ctx:VxV)
> - space required before the open parenthesis '('
>
> Signed-off-by: Punit Vara <punitvara at gmail.com>
> ---
> drivers/block/ataflop.c | 244 ++++++++++++++++++++++++------------------------
> 1 file changed, 122 insertions(+), 122 deletions(-)
>
> diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
> index 5b31772..62763fd 100644
> --- a/drivers/block/ataflop.c
> +++ b/drivers/block/ataflop.c
> @@ -32,7 +32,7 @@
> * the FDC will otherwise wait forever when no disk is inserted...
> *
> * ++ Freddi Aschwanden (fa) 20.9.95 fixes for medusa:
> - * - MFPDELAY() after each FDC access -> atari
> + * - MFPDELAY() after each FDC access -> atari
> * - more/other disk formats
> * - DMA to the block buffer directly if we have a 32bit DMA
> * - for medusa, the step rate is always 3ms
> @@ -45,7 +45,7 @@
> * Roman 10/15/95:
> * - implement some more ioctls
> * - disk formatting
> - *
> + *
> * Andreas 95/12/12:
> * - increase gap size at start of track for HD/ED disks
> *
> @@ -95,39 +95,39 @@ static struct atari_disk_type {
> } atari_disk_type[] = {
> { "d360", 9, 720, 0, 0}, /* 0: 360kB diskette */
> { "D360", 9, 720, 0, 1}, /* 1: 360kb in 720k or 1.2MB drive */
> - { "D720", 9,1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
> - { "D820", 10,1640, 0, 0}, /* 3: DD disk with 82 tracks/10 sectors */
> + { "D720", 9, 1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
> + { "D820", 10, 1640, 0, 0}, /* 3: DD disk with 82 tracks/10 sectors */
> /* formats above are probed for type DD */
> #define MAX_TYPE_DD 3
> - { "h1200",15,2400, 3, 0}, /* 4: 1.2MB diskette */
> - { "H1440",18,2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
> - { "H1640",20,3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr 20 sec */
> + { "h1200", 15, 2400, 3, 0}, /* 4: 1.2MB diskette */
> + { "H1440", 18, 2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
> + { "H1640", 20, 3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr 20 sec */
> /* formats above are probed for types DD and HD */
> #define MAX_TYPE_HD 6
> - { "E2880",36,5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
> - { "E3280",40,6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr 40 sec */
> + { "E2880", 36, 5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
> + { "E3280", 40, 6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr 40 sec */
> /* formats above are probed for types DD, HD and ED */
> #define MAX_TYPE_ED 8
> /* types below are never autoprobed */
> - { "H1680",21,3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr 21 sec */
> - { "h410",10,820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec, stretch */
> - { "h1476",18,2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
> - { "H1722",21,3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
> - { "h420",10,840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec, stretch */
> - { "H830",10,1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
> - { "h1494",18,2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
> - { "H1743",21,3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
> - { "h880",11,1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
> - { "D1040",13,2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
> - { "D1120",14,2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
> - { "h1600",20,3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
> - { "H1760",22,3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
> - { "H1920",24,3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
> - { "E3200",40,6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
> - { "E3520",44,7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
> - { "E3840",48,7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
> - { "H1840",23,3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
> - { "D800",10,1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
> + { "H1680", 21, 3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr 21 sec */
> + { "h410", 10, 820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec, stretch */
> + { "h1476", 18, 2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
> + { "H1722", 21, 3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
> + { "h420", 10, 840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec, stretch */
> + { "H830", 10, 1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
> + { "h1494", 18, 2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
> + { "H1743", 21, 3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
> + { "h880", 11, 1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
> + { "D1040", 13, 2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
> + { "D1120", 14, 2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
> + { "h1600", 20, 3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
> + { "H1760", 22, 3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
> + { "H1920", 24, 3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
> + { "E3200", 40, 6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
> + { "E3520", 44, 7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
> + { "E3840", 48, 7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
> + { "H1840", 23, 3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
> + { "D800", 10, 1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
> };
>
> static int StartDiskType[] = {
> @@ -199,7 +199,7 @@ static struct atari_disk_type user_params[FD_MAX_UNITS];
>
> /*
> * User-provided permanent type information. 'drive' points to
> - * the respective entry of this array. Set by FDDEFPRM ioctls,
> + * the respective entry of this array. Set by FDDEFPRM ioctls,
> * restored upon disk change by floppy_revalidate() if valid (as seen by
> * default_params[].blocks > 0 - a bit in unit[].flags might be used for this?)
> */
> @@ -241,7 +241,7 @@ static struct atari_floppy_struct {
> __val & 0xff; \
> })
>
> -#define FDC_WRITE(reg,val) \
> +#define FDC_WRITE(reg, val) \
> do { \
> /* unsigned long __flags; */ \
> /* local_irq_save(__flags); */ \
> @@ -250,7 +250,7 @@ static struct atari_floppy_struct {
> dma_wd.fdc_acces_seccount = (val); \
> MFPDELAY(); \
> /* local_irq_restore(__flags); */ \
> - } while(0)
> + } while (0)
>
>
> /* Buffering variables:
> @@ -281,7 +281,7 @@ static int BufferDrive, BufferSide, BufferTrack;
> static int read_track; /* non-zero if we are reading whole tracks */
>
> #define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512)
> -#define IS_BUFFERED(drive,side,track) \
> +#define IS_BUFFERED(drive, side, track) \
> (BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track))
>
> /*
> @@ -339,35 +339,35 @@ static int NeedSeek = 0;
>
> /***************************** Prototypes *****************************/
>
> -static void fd_select_side( int side );
> -static void fd_select_drive( int drive );
> -static void fd_deselect( void );
> -static void fd_motor_off_timer( unsigned long dummy );
> -static void check_change( unsigned long dummy );
> +static void fd_select_side(int side);
> +static void fd_select_drive(int drive);
> +static void fd_deselect(void);
> +static void fd_motor_off_timer(unsigned long dummy);
> +static void check_change(unsigned long dummy);
> static irqreturn_t floppy_irq (int irq, void *dummy);
> -static void fd_error( void );
> +static void fd_error(void);
> static int do_format(int drive, int type, struct atari_format_descr *desc);
> -static void do_fd_action( int drive );
> -static void fd_calibrate( void );
> -static void fd_calibrate_done( int status );
> -static void fd_seek( void );
> -static void fd_seek_done( int status );
> -static void fd_rwsec( void );
> -static void fd_readtrack_check( unsigned long dummy );
> -static void fd_rwsec_done( int status );
> +static void do_fd_action(int drive);
> +static void fd_calibrate(void);
> +static void fd_calibrate_done(int status);
> +static void fd_seek(void);
> +static void fd_seek_done(int status);
> +static void fd_rwsec(void);
> +static void fd_readtrack_check(unsigned long dummy);
> +static void fd_rwsec_done(int status);
> static void fd_rwsec_done1(int status);
> -static void fd_writetrack( void );
> -static void fd_writetrack_done( int status );
> -static void fd_times_out( unsigned long dummy );
> -static void finish_fdc( void );
> -static void finish_fdc_done( int dummy );
> -static void setup_req_params( int drive );
> -static void redo_fd_request( void);
> +static void fd_writetrack(void);
> +static void fd_writetrack_done(int status);
> +static void fd_times_out(unsigned long dummy);
> +static void finish_fdc(void);
> +static void finish_fdc_done(int dummy);
> +static void setup_req_params(int drive);
> +static void redo_fd_request(void);
> static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
> cmd, unsigned long param);
> -static void fd_probe( int drive );
> -static int fd_test_drive_present( int drive );
> -static void config_types( void );
> +static void fd_probe(int drive);
> +static int fd_test_drive_present(int drive);
> +static void config_types(void);
> static int floppy_open(struct block_device *bdev, fmode_t mode);
> static void floppy_release(struct gendisk *disk, fmode_t mode);
>
> @@ -377,7 +377,7 @@ static DEFINE_TIMER(motor_off_timer, fd_motor_off_timer, 0, 0);
> static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0);
> static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0);
> static DEFINE_TIMER(fd_timer, check_change, 0, 0);
> -
> +
> static void fd_end_request_cur(int err)
> {
> if (!__blk_end_request_cur(fd_request, err))
> @@ -390,7 +390,7 @@ static inline void start_motor_off_timer(void)
> MotorOffTrys = 0;
> }
>
> -static inline void start_check_change_timer( void )
> +static inline void start_check_change_timer(void)
> {
> mod_timer(&fd_timer, jiffies + CHECK_CHANGE_DELAY);
> }
> @@ -407,13 +407,13 @@ static inline void stop_timeout(void)
>
> /* Select the side to use. */
>
> -static void fd_select_side( int side )
> +static void fd_select_side(int side)
> {
> unsigned long flags;
>
> /* protect against various other ints mucking around with the PSG */
> local_irq_save(flags);
> -
> +
> sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
> sound_ym.wd_data = (side == 0) ? sound_ym.rd_data_reg_sel | 0x01 :
> sound_ym.rd_data_reg_sel & 0xfe;
> @@ -426,11 +426,11 @@ static void fd_select_side( int side )
> * clock speed for this disk's type.
> */
>
> -static void fd_select_drive( int drive )
> +static void fd_select_drive(int drive)
> {
> unsigned long flags;
> unsigned char tmp;
> -
> +
> if (drive == SelectedDrive)
> return;
>
> @@ -443,28 +443,28 @@ static void fd_select_drive( int drive )
> local_irq_restore(flags);
>
> /* restore track register to saved value */
> - FDC_WRITE( FDCREG_TRACK, UD.track );
> + FDC_WRITE(FDCREG_TRACK, UD.track);
> udelay(25);
>
> /* select 8/16 MHz */
> if (UDT)
> if (ATARIHW_PRESENT(FDCSPEED))
> dma_wd.fdc_speed = UDT->fdc_speed;
> -
> +
> SelectedDrive = drive;
> }
>
>
> /* Deselect both drives. */
>
> -static void fd_deselect( void )
> +static void fd_deselect(void)
> {
> unsigned long flags;
>
> /* protect against various other ints mucking around with the PSG */
> local_irq_save(flags);
> atari_dont_touch_floppy_select = 0;
> - sound_ym.rd_data_reg_sel=14; /* Select PSG Port A */
> + sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
> sound_ym.wd_data = (sound_ym.rd_data_reg_sel |
> (MACH_IS_FALCON ? 3 : 7)); /* no drives selected */
> /* On Falcon, the drive B select line is used on the printer port, so
> @@ -479,7 +479,7 @@ static void fd_deselect( void )
> * counts the index signals, which arrive only if one drive is selected.
> */
>
> -static void fd_motor_off_timer( unsigned long dummy )
> +static void fd_motor_off_timer(unsigned long dummy)
> {
> unsigned char status;
>
> @@ -490,7 +490,7 @@ static void fd_motor_off_timer( unsigned long dummy )
> if (stdma_islocked())
> goto retry;
>
> - status = FDC_READ( FDCREG_STATUS );
> + status = FDC_READ(FDCREG_STATUS);
>
> if (!(status & 0x80)) {
> /* motor already turned off by FDC -> deselect drives */
> @@ -515,7 +515,7 @@ static void fd_motor_off_timer( unsigned long dummy )
> * as possible) and keep track of the current state of the write protection.
> */
>
> -static void check_change( unsigned long dummy )
> +static void check_change(unsigned long dummy)
> {
> static int drive = 0;
>
> @@ -534,11 +534,11 @@ static void check_change( unsigned long dummy )
> old_porta = sound_ym.rd_data_reg_sel;
> sound_ym.wd_data = (old_porta | DSKDRVNONE) &
> ~(drive == 0 ? DSKDRV0 : DSKDRV1);
> - stat = !!(FDC_READ( FDCREG_STATUS ) & FDCSTAT_WPROT);
> + stat = !!(FDC_READ(FDCREG_STATUS) & FDCSTAT_WPROT);
> sound_ym.wd_data = old_porta;
>
> if (stat != UD.wpstat) {
> - DPRINT(( "wpstat[%d] = %d\n", drive, stat ));
> + DPRINT(("wpstat[%d] = %d\n", drive, stat));
> UD.wpstat = stat;
> set_bit (drive, &changed_floppies);
> }
> @@ -548,7 +548,7 @@ static void check_change( unsigned long dummy )
> start_check_change_timer();
> }
>
> -
> +
> /* Handling of the Head Settling Flag: This flag should be set after each
> * seek operation, because we don't use seeks with verify.
> */
> @@ -562,7 +562,7 @@ static inline int get_head_settle_flag(void)
> {
> int tmp = HeadSettleFlag;
> HeadSettleFlag = 0;
> - return( tmp );
> + return(tmp);
> }
>
> static inline void copy_buffer(void *from, void *to)
> @@ -574,25 +574,25 @@ static inline void copy_buffer(void *from, void *to)
> *p2++ = *p1++;
> }
>
> -
> -
> +
> +
>
> /* General Interrupt Handling */
>
> -static void (*FloppyIRQHandler)( int status ) = NULL;
> +static void (*FloppyIRQHandler)(int status) = NULL;
>
> static irqreturn_t floppy_irq (int irq, void *dummy)
> {
> unsigned char status;
> - void (*handler)( int );
> + void (*handler)(int);
>
> handler = xchg(&FloppyIRQHandler, NULL);
>
> if (handler) {
> nop();
> - status = FDC_READ( FDCREG_STATUS );
> - DPRINT(("FDC irq, status = %02x handler = %08lx\n",status,(unsigned long)handler));
> - handler( status );
> + status = FDC_READ(FDCREG_STATUS);
> + DPRINT(("FDC irq, status = %02x handler = %08lx\n", status, (unsigned long)handler));
> + handler(status);
> }
> else {
> DPRINT(("FDC irq, no handler\n"));
> @@ -605,7 +605,7 @@ static irqreturn_t floppy_irq (int irq, void *dummy)
> * recalibrate, then try again, and fail after MAX_ERRORS.
> */
>
> -static void fd_error( void )
> +static void fd_error(void)
> {
> if (IsFormatting) {
> IsFormatting = 0;
> @@ -619,11 +619,11 @@ static void fd_error( void )
>
> fd_request->errors++;
> if (fd_request->errors >= MAX_ERRORS) {
> - printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
> + printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive);
> fd_end_request_cur(-EIO);
> }
> else if (fd_request->errors == RECALIBRATE_ERRORS) {
> - printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
> + printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive);
> if (SelectedDrive != -1)
> SUD.track = -1;
> }
> @@ -632,16 +632,16 @@ static void fd_error( void )
>
>
>
> -#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0)
> +#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while (0)
>
>
> /* ---------- Formatting ---------- */
>
> -#define FILL(n,val) \
> +#define FILL(n, val) \
> do { \
> - memset( p, val, n ); \
> + memset(p, val, n); \
> p += n; \
> - } while(0)
> + } while (0)
>
> static int do_format(int drive, int type, struct atari_format_descr *desc)
> {
> @@ -650,12 +650,12 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
> unsigned long flags;
>
> DPRINT(("do_format( dr=%d tr=%d he=%d offs=%d )\n",
> - drive, desc->track, desc->head, desc->sect_offset ));
> + drive, desc->track, desc->head, desc->sect_offset));
>
> wait_event(fdc_wait, cmpxchg(&fdc_busy, 0, 1) == 0);
> local_irq_save(flags);
> stdma_lock(floppy_irq, NULL);
> - atari_turnon_irq( IRQ_MFP_FDC ); /* should be already, just to be sure */
> + atari_turnon_irq(IRQ_MFP_FDC); /* should be already, just to be sure */
> local_irq_restore(flags);
>
> if (type) {
> @@ -679,38 +679,38 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
> contents become invalid! */
> BufferDrive = -1;
> /* stop deselect timer */
> - del_timer( &motor_off_timer );
> + del_timer(&motor_off_timer);
>
> - FILL( 60 * (nsect / 9), 0x4e );
> - for( sect = 0; sect < nsect; ++sect ) {
> - FILL( 12, 0 );
> - FILL( 3, 0xf5 );
> + FILL(60 * (nsect / 9), 0x4e);
> + for (sect = 0; sect < nsect; ++sect) {
> + FILL(12, 0);
> + FILL(3, 0xf5);
> *p++ = 0xfe;
> *p++ = desc->track;
> *p++ = desc->head;
> *p++ = (nsect + sect - desc->sect_offset) % nsect + 1;
> *p++ = 2;
> *p++ = 0xf7;
> - FILL( 22, 0x4e );
> - FILL( 12, 0 );
> - FILL( 3, 0xf5 );
> + FILL(22, 0x4e);
> + FILL(12, 0);
> + FILL(3, 0xf5);
> *p++ = 0xfb;
> - FILL( 512, 0xe5 );
> + FILL(512, 0xe5);
> *p++ = 0xf7;
> - FILL( 40, 0x4e );
> + FILL(40, 0x4e);
> }
> - FILL( TrackBuffer+BUFFER_SIZE-p, 0x4e );
> + FILL(TrackBuffer+BUFFER_SIZE-p, 0x4e);
>
> IsFormatting = 1;
> FormatError = 0;
> ReqTrack = desc->track;
> ReqSide = desc->head;
> - do_fd_action( drive );
> + do_fd_action(drive);
>
> wait_for_completion(&format_wait);
>
> redo_fd_request();
> - return( FormatError ? -EIO : 0 );
> + return(FormatError ? -EIO : 0);
> }
>
>
> @@ -723,18 +723,18 @@ static int do_format(int drive, int type, struct atari_format_descr *desc)
> * set function to propagate the request down to fd_rwsec_done().
> */
>
> -static void do_fd_action( int drive )
> +static void do_fd_action(int drive)
> {
> DPRINT(("do_fd_action\n"));
> -
> +
> if (UseTrackbuffer && !IsFormatting) {
> repeat:
> - if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
> + if (IS_BUFFERED(drive, ReqSide, ReqTrack)) {
> if (ReqCmd == READ) {
> - copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
> + copy_buffer( SECTOR_BUFFER(ReqSector), ReqData);
> if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
> /* read next sector */
> - setup_req_params( drive );
> + setup_req_params(drive);
> goto repeat;
> }
> else {
> @@ -847,7 +847,7 @@ static void fd_seek_done(int status)
> dma_wd.fdc_speed = SUDT->fdc_speed;
> if (status & FDCSTAT_RECNF) {
> printk(KERN_ERR "fd%d: seek error (to track %d)\n",
> - SelectedDrive, ReqTrack );
> + SelectedDrive, ReqTrack);
> /* we don't know exactly which track we are on now! */
> SUD.track = -1;
> fd_error();
> @@ -924,7 +924,7 @@ static void fd_rwsec(void)
> dma_wd.dma_hi = (unsigned char)paddr;
> MFPDELAY();
> local_irq_restore(flags);
> -
> +
> /* Clear FIFO and switch DMA to correct mode */
> dma_wd.dma_mode_status = 0x90 | rwflag;
> MFPDELAY();
> @@ -1251,10 +1251,10 @@ static void fd_times_out(unsigned long dummy)
> FDC_WRITE(FDCREG_CMD, FDCCMD_FORCI);
> udelay(25);
>
> - printk(KERN_ERR "floppy timeout\n" );
> + printk(KERN_ERR "floppy timeout\n");
> fd_error();
> end:
> - atari_enable_irq( IRQ_MFP_FDC );
> + atari_enable_irq(IRQ_MFP_FDC);
> }
>
>
> @@ -1284,7 +1284,7 @@ static void finish_fdc(void)
> }
>
>
> -static void finish_fdc_done( int dummy )
> +static void finish_fdc_done(int dummy)
> {
> unsigned long flags;
>
> @@ -1304,7 +1304,7 @@ static void finish_fdc_done( int dummy )
> local_irq_save(flags);
> stdma_release();
> fdc_busy = 0;
> - wake_up( &fdc_wait );
> + wake_up(&fdc_wait);
> local_irq_restore(flags);
>
> DPRINT(("finish_fdc() finished\n"));
> @@ -1552,7 +1552,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
> switch (cmd) {
> case FDSETPRM:
> case FDDEFPRM:
> - /*
> + /*
> * MSch 7/96: simple 'set geometry' case: just set the
> * 'default' device params (minor == 0).
> * Currently, the drive geometry is cleared after each
> @@ -1566,8 +1566,8 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
> return -EBUSY;
> if (copy_from_user(&setprm, argp, sizeof(setprm)))
> return -EFAULT;
> - /*
> - * first of all: check for floppy change and revalidate,
> + /*
> + * first of all: check for floppy change and revalidate,
> * or the next access will revalidate - and clear UDT :-(
> */
>
> @@ -1585,10 +1585,10 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
> return -EINVAL;
> }
>
> - /*
> + /*
> * type == 0: first look for a matching entry in the type list,
> * and set the UD.disktype field to use the perdefined entry.
> - * TODO: add user-defined format to head of autoprobe list ?
> + * TODO: add user-defined format to head of autoprobe list ?
> * Useful to include the user-type for future autodetection!
> */
>
> @@ -1602,9 +1602,9 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
> dtp = &atari_disk_type[setidx];
>
> /* found matching entry ?? */
> - if ( dtp->blocks == setprm.size
> + if (dtp->blocks == setprm.size
> && dtp->spt == setprm.sect
> - && dtp->stretch == setprm.stretch ) {
> + && dtp->stretch == setprm.stretch) {
> if (UD.flags & FTD_MSG)
> printk (KERN_INFO "floppy%d: setting %s %p!\n",
> drive, dtp->name, dtp);
> @@ -1619,7 +1619,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode,
> default_params[drive].fdc_speed = dtp->fdc_speed;
> default_params[drive].stretch = dtp->stretch;
> }
> -
> +
> return 0;
> }
>
> @@ -1715,7 +1715,7 @@ static void __init fd_probe(int drive)
>
> UD.connected = 1;
> UD.track = 0;
> - switch(UserSteprate[drive]) {
> + switch (UserSteprate[drive]) {
> case 2:
> UD.steprate = FDCSTEP_2;
> break;
> --
> 2.5.3
>
Last 3 patch generate some warnings by checkpatch but that warning
already present for actual code . This file was having around 250
warning. and 250 errors. If I would go to solve all lines it will be
difficult to review so I fix them in possible small chunks. I will be
sending further patches soon for this particular file.