[DRBD-user] <1>netlink: policy violation t:6[6] e:-34

Cesar Peschiera brain at click.com.py
Tue Nov 25 07:51:46 CET 2014

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


Hi to all

I have the same problem, but in my case is a serious problem, i get these 
error messages:
Starting DRBD resources:[
     create res: r1 r2
   prepare disk: r1 r2
    adjust disk: r1:failed(apply-al:255) r2
     adjust net: r1 r2
]
<1>received netlink packet for minor 14, while expecting 21
<1>received netlink packet for minor 14, while expecting 11
<1>received netlink packet for minor 14, while expecting 21
<1>received netlink packet for minor 14, while expecting 11
<1>received netlink packet for minor 14, while expecting 21
<1>received netlink packet for minor 14, while expecting 11
<1>netlink: policy violation t:6[6] e:-34
21: reply did not validate - do you need to upgrade your userland tools?
<1>netlink: policy violation t:6[6] e:-34
11: reply did not validate - do you need to upgrade your userland tools?
11: State change failed: (-2) Need access to UpToDate data
Command '/sbin/drbdsetup primary 11' terminated with exit code 17
11: State change failed: (-2) Need access to UpToDate data
Command '/sbin/drbdsetup primary 11' terminated with exit code 17
11: State change failed: (-2) Need access to UpToDate data
Command '/sbin/drbdsetup primary 11' terminated with exit code 17
11: State change failed: (-2) Need access to UpToDate data
Command '/sbin/drbdsetup primary 11' terminated with exit code 17
11: State change failed: (-2) Need access to UpToDate data
Command '/sbin/drbdsetup primary 11' terminated with exit code 17

So i changed to DRBD 8.4.4, but i get the same error messages.

The brunt is that I am losing the metadata of the volume, so it will be 
impossible put the servers in production.

Also, very strange thing is that i use DRBD 8.4.4 in other servers with NICs 
Intel of 1 Gb/s with bonding balance-rr NIC-to-NIC since much time ago and 
without problems, the difference now is that i am configuring a new servers 
with NICs Intel 10 Gb/s and with transceivers no original of Intel.

Do you have some suggestions?


Best regards
Cesar

----- Original Message ----- 
From: "Claudius Herder" <claudius.herder at tiri.li>
To: <drbd-user at lists.linbit.com>
Sent: Thursday, November 20, 2014 11:21 AM
Subject: [DRBD-user] <1>netlink: policy violation t:6[6] e:-34


> Hi all,
>
> I compiled drbd-utils-8.9.1.tar.gz and drbd-8.4.5.tar.gz from
> http://oss.linbit.com/drbd/ for XenServer 6.2.
>
> Everything seems to work as expected, but on start I get the following
> message:
>
> # /etc/init.d/drbd start
> Starting DRBD resources: [
>     create res: r0
>   prepare disk: r0
>    adjust disk: r0
>     adjust net: r0
> ]
> <1>netlink: policy violation t:6[6] e:-34
>
> 0: reply did not validate - do you need to upgrade your userland tools?
>
> # cat /proc/drbd
> version: 8.4.5 (api:1/proto:86-101)
> GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by root at xxxxx,
> 2014-11-08 04:51:10
> 0: cs:Connected ro:Primary/Primary ds:UpToDate/UpToDate C r-----
>    ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:0
>
> Is this something to worry about?
> I thought drbd-utils-8.9.1 and drbd-8.4.5 were compatible.
>
> Thanks in advance
>
> regards
> Claudius
> -- 
> 21493 Schwarzenbek
> Tel. 04151 8674995
> Fax. 04151 8674996
> Net. http://www.tiri.li
>
> Geschäftsführer: Anja Baumann, Thomas Baumann
> Sitz Schwarzenbek, Amtsgericht Lübeck, HRB 8837 HL
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
> 




More information about the drbd-user mailing list