Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi guys and Mr. Kaloyan Kovachev @ To anyone that can help me with this problem @ Kaloyan Kovachev: Many thanks for your kind attention and your time, but I don't understand you very well, I'm no expert in cluster configurations, and do not speak English well (but eager to learn), so if you can help me, please speak me in a easy mode for me. I'll be very grateful if you can help me Please read all this message, and if you can help me, please let me know if you need more details of anything, please let me know (for example my cluster configuration file) Let me tell you what I want: As i have DRBD on two Nodes, i want to built fencing handlers for freeze IO during the disconnected period, reconnect automatically and quickly, and replay pending buffers, without any reset", and if this is possible, must works without use any addtional software for Clusters, ie without RHCS, RHCM, Pacemaker, Openais, heartbeat, etc. *My scenary:* - I have 2 Proxmox Nodes in the same LAN, the Proxmox VE HA Cluster is based on proven Linux HA technologies Please see: http://pve.proxmox.com/wiki/High_Availability_Cluster - I have DRBD in each Proxmox Node for my KVM VMs (for use as virtual Hard disks) - I have configurated "manual_fence" for my Proxmox Nodes. ie that in case of failures, I must disconnect the electric current brutally and after by CLI I apply my "manual_fence" for get HA. This technique works well for me, so i don't need extra cluster configurations of Linux HA for DRBD. - All the Proxmox Nodes have ssh comunication without need to enter password *My questions:* 1- Can I enable automatic reconnect of resources of DRBD in my Proxmox Nodes in case of resources DRBD are disconnect? 2- Is necessary configure only the DRBD configuration files, or i need to make others configurations of cluster (for example on Linux HA)? 3- If you can help me, please write with a example of each configuration file (because i don't understand many theoretical explanations. For this purpose, my nodes are called "kvm5" and "kvm6" respectively. kvm5 have: ----------- IP for the Switch LAN communication = 10.0.0.5 IP for the DRBD communication (NIC to NIC) = 10.10.10.5 kvm5 have: ----------- IP for the Switch LAN communication = 10.0.0.6 IP for the DRBD communication (NIC to NIC) = 10.10.10.6 Best regards Cesar -- View this message in context: http://drbd.10923.n7.nabble.com/fence-peer-tp3298p17995.html Sent from the DRBD - User mailing list archive at Nabble.com.