Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
The disk is able to be mounted manually on the primary, but the two nodes will not talk to each other to sync up. Scot Kreienkamp Senior Systems Engineer skreien at la-z-boy.com -----Original Message----- From: Felix Frank [mailto:ff at mpexnet.de] Sent: Thursday, March 08, 2012 11:21 AM To: Scot Kreienkamp Cc: drbd-user Subject: Re: [DRBD-user] network startup failure On 03/08/2012 05:18 PM, Scot Kreienkamp wrote: > Unfortunately there aren't any logs from the failure. When I restarted the server it went into recovery mode because it couldn't mount the drbd disk. At that point the filesystem is mounted read-only. I had to remount the / partition read-write and remove the drbd mount from fstab, then reboot again to get the machine back to a working state. OK. So is the failure not present when you manually start DRBD after removing it from fstab? This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, please note that you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by e-mail or by telephone at the above number. Thank you.