[DRBD-user] secondary DRBD node crash

Paulo Aires aires-it-systems p.aires at ai-t.eu
Mon Aug 15 18:49:08 CEST 2011

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


Hello all,

if i try to start a sync from primary to the secondary node. the 
secondary node crash after any seconds.

How i can do to debug this issu?
In the logfiles i dont can see any information :(


System info:
Debian with Kernel 2.6.32-5-openvz-amd64
Hardware IBM eServer 326M 8GB RAM 2x500GB S-ATA Disks

drbd cofigs:
global_common.conf
global {
         usage-count no;
         # minor-count dialog-refresh disable-ip-verification
         }


common {
         protocol C;

         handlers {
#                pri-on-incon-degr 
"/usr/lib/drbd/notify-pri-on-incon-degr.sh; 
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; 
reboot -f";
#                pri-lost-after-sb 
"/usr/lib/drbd/notify-pri-lost-after-sb.sh; 
/usr/lib/drbd/notify-emergency-reboot.sh; echo b > /proc/sysrq-trigger ; 
reboot -f";
#                local-io-error "/usr/lib/drbd/notify-io-error.sh; 
/usr/lib/drbd/notify-emergency-shutdown.sh; echo o > /proc/sysrq-trigger 
; halt -f";
                 # fence-peer "/usr/lib/drbd/crm-fence-peer.sh";
                 # split-brain "/usr/lib/drbd/notify-split-brain.sh root";
                 # out-of-sync "/usr/lib/drbd/notify-out-of-sync.sh root";
                 # before-resync-target 
"/usr/lib/drbd/snapshot-resync-target-lvm.sh -p 15 -- -c 16k";
                 # after-resync-target 
/usr/lib/drbd/unsnapshot-resync-target-lvm.sh;
         }


         startup {
                 # wfc-timeout degr-wfc-timeout outdated-wfc-timeout 
wait-after-sb;
                 wfc-timeout 60; # 1 minute.
                 degr-wfc-timeout 120; # 2 minuten
                 }


         disk    {
                 on-io-error detach;
                 }

         net     {
                 # snd-buf-size rcvbuf-size timeout connect-int ping-int 
ping-timeout max-buffers
                 # max-epoch-size ko-count allow-two-primaries 
cram-hmac-alg shared-secret
                 # after-sb-0pri after-sb-1pri after-sb-2pri 
data-integrity-alg no-tcp-cork
                 }

         syncer  {
                 rate 25M;
                 al-extents 250;
                 }
}

Resorce:
resource vz0 {
protocol C;

         startup {
                 become-primary-on server1;
         }


         on server1 {
             device /dev/drbd0;
             disk /dev/md2;
             meta-disk internal;
             address 10.0.4.101:17610;
         }

         on server2 {
             device /dev/drbd0;
             disk /dev/md2;
             meta-disk internal;
             address 10.0.4.201:17620;
         }
}


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20110815/36f548f1/attachment.htm>


More information about the drbd-user mailing list