Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
On 10-09-13 12:33 PM, Sam Przyswa wrote: >> You need to attach the local disk first, it's currently diskless. >> >> drbdadm attach r0 >> > > Ok, I got that: > > # drbdadm attach r0 > 2: Failure: (114) Lower device is already claimed. This usually means it > is *mounted*. > Command 'drbdsetup 2 disk /dev/LVM-1/POSTFIX-2 /dev/LVM-1/meta-1 0 > --set-defaults --create-device --on-io-error=detach' terminated with > exit code 10 > > But the disk *must* be mounted > > Sam. No, it should not be mounted. DRBD expects to use a raw partition as it's backing device. So your '/dev/LVM-1/POSTFIX' LV should be unmounted. If you see it in the output of 'df -h' then that is your problem. -- Digimer E-Mail: linux at alteeve.com AN!Whitepapers: http://alteeve.com Node Assassin: http://nodeassassin.org