Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
chambal <2iow-li6l at dea.spamcon.org> wrote: >"J. Ryan Earl" <oss at jryanearl.us> wrote: > >>On Sun, Nov 7, 2010 at 1:04 AM, chambal <2iow-li6l at dea.spamcon.org> wrote: >> >>> >> Then at the "drbadadm attach r0" step, it crashed. Nothing >>> >>[...] >> >>> >> showed in the syslog or watch windows (it crashed instantly). >>> >> After reboot, nothing in syslog after the above lines, until the >>> >> new boot messages.It's a plain system, nothing special using the disk - >>> it's an SSD >>> with some partitions, there's no raid or anything, this 1GB >>> /dev/sda2 partition is created and formatted by the OS installer >>> but then I remove it from fstab and it's only used for drbd. >> >> >>Have you zeroed out this this partition before running 'drbdadm create-md'? > >Yes, or at least the first part, via: > >dd if=/dev/zero bs=1M count=1 of=/dev/sda2 Follow-up: zeroing the entire partition made no difference. The problem is definitely the VIA EPIA M800 platform. No other non-VIA Mini-ITX platform tried has these problems with the same SSD drives and software.