Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Yes, you should not mount the lower block devices, only the /dev/drbd1 device. Take any lower devices out of /etc/fstab. On 3/18/10 12:04 PM, Cameron Smith wrote: > I am experiencing the error: > > "# drbdadm up r0 > /dev/drbd1: Failure: (114) Lower device is already claimed. This > usually means it is mounted. > Command 'drbdsetup /dev/drbd1 disk /dev/sda2 /dev/sda6 0 > --set-defaults --create-device' terminated with exit code 10" > > DRBD was syncing between node1 and node2 and when I rebooted node1 I > got this from cat/proc/drbd: > 1:r0 Connected Secondary/Secondary Diskless/UpToDate > > So I ran: > drbdadm up r0 > > and got the above error. > > Is the lower device the actual partition the drbd device is on which > is my case is /dev/sda2? > > Should that /dev/sda2 not be mounted at boot? > > What do I do to make DRBD happy on reboot? > > Thanks! > Cameron > > > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20100318/1cd8554e/attachment.htm>