Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
solved:
on sm-storage-1a {
device /dev/drbd0;
disk /dev/sde1;
# address 10.255.255.203:7788;
address 10.13.0.118:7788;
meta-disk internal;
}
on sm-storage-1b {
device /dev/drbd0;
disk /dev/sde1;
# address 10.255.255.204:7788;
address 10.13.0.119:7788;
meta-disk internal;
}
----- Original Message ----
From: Ralf W. <mrsun2001 at yahoo.de>
To: drbd-user at lists.linbit.com
Sent: Wed, June 2, 2010 12:42:53 PM
Subject: [DRBD-user] how to divide shared storage network and drbd replication network
Hello - I have the following network configuration on both storage servers:
bond0 --> 10.255.255.x/24 (shared storage network - here I have KVM node who are exporting iscsi targets from the ha-cluster)
bond1 --> 10.13.0.x/24 (This should be the replication link, were both clusters replicate/sync/update)
eth0 --> 10.12.33.x/24 (only admin network)
eth1 --> 10.14.33.x/24 (here I want the ha heartbeat to go over)
-----> crm configure show
node $id="e471b446-a7e2-4253-a257-bda343d7c13d" sm-storage-1b \
attributes standby="off"
node $id="fe27f2e0-d551-4495-bfb9-819d31884a65" sm-storage-1a \
attributes standby="off"
primitive ha_drbd ocf:linbit:drbd \
params drbd_resource="vm3" drbdconf="/etc/drbd.conf" \
op monitor interval="59s" role="Master" timeout="30s" \
op monitor interval="60s" role="Slave" timeout="30s" \
meta is-managed="true"
primitive ip_drbd ocf:heartbeat:IPaddr2 \
params ip="10.255.255.205" nic="bond0" \
meta is-managed="true"
primitive iscsi lsb:iscsi-target \
meta is-managed="true"
primitive lvm_drbd ocf:heartbeat:LVM \
params volgrpname="vg_ralf1" exclusive="true" \
meta is-managed="true"
group drbdd lvm_drbd iscsi ip_drbd \
meta target-role="Started"
ms ms_drbd_fail ha_drbd \
meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" target-role="Started"
colocation col_drbd inf: drbdd ms_drbd_fail:Master
order drbd_after inf: ms_drbd_fail:promote drbdd:start
property $id="cib-bootstrap-options" \
dc-deadtime="60" \
cluster-delay="60" \
stonith-enabled="false" \
default-action-timeout="20" \
stonith-timeout="60" \
dc-version="1.0.8-042548a451fce8400660f6031f4da6f0223dd5dd" \
cluster-infrastructure="Heartbeat" \
last-lrm-refresh="1275383370"
<---- end
---> ha.cf
debugfile /var/log/ha-debug
logfacility local0
mcast eth1 225.0.0.1 694 1 0
ping 10.14.33.118
ping 10.14.33.119
respawn hacluster /usr/lib/heartbeat/dopd
apiauth dopd gid=haclient uid=hacluster
node sm-storage-1a
node sm-storage-1b
crm yes
<---
--> /etc/drbd.conf
global { usage-count yes; }
common { syncer { rate 512M; } }
resource vm3 {
protocol C;
startup {
wfc-timeout 0;
degr-wfc-timeout 120;
# become-primary-on both;
}
handlers {
fence-peer "/usr/lib/heartbeat/drbd-peer-outdater -t 5";
}
disk {
on-io-error detach;
fencing resource-only;
}
net {
cram-hmac-alg sha1;
# allow-two-primaries; # Wichtig für Primary/Primary Setup
}
on sm-storage-1a {
device /dev/drbd0;
disk /dev/sde1;
address 10.255.255.203:7788;
meta-disk internal;
}
on sm-storage-1b {
device /dev/drbd0;
disk /dev/sde1;
address 10.255.255.204:7788;
meta-disk internal;
}
}
<---
sm-storage-1a = 10.12.33.118(eth0), 10.255.255.203(bond0), 10.13.0.118(bond1), 10.14.33.118(eth1)
sm-storage-1b = 10.12.33.119(eth0), 10.255.255.204(bond0), 10.13.0.119(bond1), 10.14.33.119(eth1)
Question: How can I divide shared storage network and drbd replication network? Is this a crm configuration or a ha.cf configuration. I'm confused. Thank you for your help.
Ralf
_______________________________________________
drbd-user mailing list
drbd-user at lists.linbit.com
http://lists.linbit.com/mailman/listinfo/drbd-user