Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi, I running openfiler with fibre disks. The discs on fibre show diskless on drbd status: 0:cluster_metadata Connected Secondary/Secondary UpToDate/UpToDate C 1:vg0drbd Connected Secondary/Secondary Diskless/Inconsistent C 2:vg1drbd Connected Secondary/Secondary Diskless/Inconsistent C 3:vg2drbd Connected Secondary/Secondary Diskless/Inconsistent C 4:vg3drbd Connected Secondary/Secondary Diskless/Inconsistent C This is the output of 'drbdadm attach vg1drbd' in /var/log/messages. The others are exactly the same. Jan 27 14:01:13 filer1 kernel: drbd2: disk( Diskless -> Attaching ) Jan 27 14:01:13 filer1 kernel: drbd2: No usable activity log found. Jan 27 14:01:13 filer1 kernel: drbd2: Method to ensure write ordering: barrier Jan 27 14:01:13 filer1 kernel: drbd2: max_segment_size ( = BIO size ) = 32768 Jan 27 14:01:13 filer1 kernel: drbd2: recounting of set bits took additional 39 jiffies Jan 27 14:01:13 filer1 kernel: drbd2: 2048 GB (536851801 bits) marked out-of-sync by on disk bit-map. Jan 27 14:01:13 filer1 kernel: drbd2: disk( Attaching -> Inconsistent ) Jan 27 14:01:13 filer1 kernel: end_request: I/O error, dev sdc, sector 4294945607 Jan 27 14:01:13 filer1 kernel: drbd2: drbd_md_sync_page_io(,4294945544s,WRITE) failed! Jan 27 14:01:13 filer1 kernel: drbd2: meta data update failed! Jan 27 14:01:13 filer1 kernel: drbd2: disk( Inconsistent -> Failed ) Jan 27 14:01:13 filer1 kernel: drbd2: Local IO failed. Detaching... Jan 27 14:01:13 filer1 kernel: drbd2: disk( Failed -> Diskless ) I have tested the fibre disks with other systems and they are fully functional. I have tested the same setup with other disks and it works fine. Any help would be very appreciated. Thank you max