Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Acually, it appears from your output that syncing is in progress:
> [>...................] sync'ed: 9.9% (9899/10979)M
^^^^^^^^
I think Lars is trying to point out that you are using a non-journaling
filesystem (ext2) for a primary/primary setup. You probably want to a
filesystem that is better suited for that kind of thing. Now, I don't know
why he won't just come out and say it that way.
-Greg
> Here's my new config. I ran pvcreate /dev/sda3 and created a Volume Group
> called VolGroup01 and a Logical Volume called LogVol00. I ran mke2fs
> /dev/drbd0 and was able to mount the filesystem. But it doesn't appear to
> be syncing with the other node. I'm not sure if it's because it's just
> not done with the initial sync or if I did something wrong. The output of
> cat /proc/drbd is below.
>
> on qa1r2cls {
> device /dev/drbd0;
> disk /dev/VolGroup01/LogVol00;
> address 10.1.50.202:7789;
> meta-disk internal;
> }
> on qa1r3cls {
> device /dev/drbd0;
> disk /dev/VolGroup01/LogVol00;
> address 10.1.50.203:7789;
> meta-disk internal;
> }
>
> version: 8.2.5 (api:88/proto:86-88)
> GIT-hash: 9faf052fdae5ef0c61b4d03890e2d2eab550610c build by root at qa1r2cls,
> 2008-
> 03-20 18:46:40
> 0: cs:SyncSource st:Primary/Primary ds:UpToDate/Inconsistent C r---
> ns:1540676 nr:609708 dw:1219368 dr:931310 al:278 bm:57 lo:0 pe:0 ua:0
> ap:0
> [>...................] sync'ed: 9.9% (9899/10979)M
> finish: 8:12:46 speed: 332 (376) K/sec
> resync: used:0/31 hits:101691 misses:144 starving:0 dirty:0
> changed:144
> act_log: used:0/127 hits:152137 misses:287 starving:0 dirty:9
> changed:278
>
> -----Original Message-----
> From: drbd-user-bounces at lists.linbit.com
> [mailto:drbd-user-bounces at lists.linbit.com] On Behalf Of Chris Raver
> Sent: Friday, March 21, 2008 9:29 AM
> To: drbd-user at lists.linbit.com
> Subject: RE: [DRBD-user] DRBD + LVM2 Setup on RHEL5.1
>
> I think this will change my configuration because I am planning on using
> LMV2. If my config looks something like this:
>
> Perhaps something like:
>
> on alice {
> device /dev/drbd0;
> disk /dev/vg_01/lv_r0;
> ...
>
> When I run pvcreate do I use /dev/sda3 and create a volume group called
> vg_01. Or do I run pvcreate /dev/drbd0 (which isn't working right now).
>
>
>
> -----Original Message-----
> From: drbd-user-bounces at lists.linbit.com
> [mailto:drbd-user-bounces at lists.linbit.com] On Behalf Of Andy Diller
> Sent: Friday, March 21, 2008 8:58 AM
> To: Florian Haas
> Cc: drbd-user at lists.linbit.com
> Subject: Re: [DRBD-user] DRBD + LVM2 Setup on RHEL5.1
>
> Perhaps something like:
>
> on alice {
> device /dev/drbd0;
> disk /dev/vg_01/lv_r0;
> ...
>
> Would make more sense.
>
> Anyone working w/ LVM will not be using the /dev/sd[x] or /dev/hd[x]
> obviously.
>
>
> -andy
>
>
> ----- "Florian Haas" <florian.haas at linbit.com> wrote:
>
>> > What device is /dev/drbd/r0? Most block devices in RHEL are going to
>> be
>> > /dev/sd[a-d] (SCSI or SATA) or /dev/hd[a-d] (IDE).
>>
>> Ouch, I hadn't realized that part of the user's guide was so easily
>> misunderstood.
>>
>> resource r0 {
>> ...
>> on alice {
>> device /dev/drbd0;
>> disk /dev/drbd/r0;
>> ...
>> }
>> on bob {
>> device /dev/drbd0;
>> disk /dev/drbd/r0;
>> ...
>> }
>> }
>>
>> This means the backing devices are LVM logical volumes named "r0" in a
>> Volume Group named "drbd". It says so in the text above the config
>> snippet, but apparently that is easily overlooked.
>>
>> I will change this to a generic foo/bar "naming convention" to avoid
>> confusion.
>>
>> Thanks for pointing this out.
>>
>> Cheers,
>> Florian
>>
>> --
>> : Florian G. Haas
>> : LINBIT Information Technologies GmbH
>> : Vivenotgasse 48, A-1120 Vienna, Austria
>>
>> When replying, there is no need to CC my personal address.
>> I monitor the list on a daily basis. Thank you.
>> _______________________________________________
>> drbd-user mailing list
>> drbd-user at lists.linbit.com
>> http://lists.linbit.com/mailman/listinfo/drbd-user
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>