Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
* Lars Ellenberg <lars.ellenberg at linbit.com> [20080313 18:54]: > On Thu, Mar 13, 2008 at 06:12:41PM -0400, Jean-Francois Malouin wrote: > > Just replaced a failed physical volume that was part of a logical > > volume device under drbd and after doing all the nitty gritty work > > (pvcreate/vgcreate/lvcreate/mkfs/resize2fs) right after re-attaching > > the backing device to the drbd block device I see the syncing going on > > from the primary, before connecting them?!? > > > > feeble-0:~# drbdadm create-md r0 > > v08 Magic number not found > > v07 Magic number not found > > v07 Magic number not found > > v08 Magic number not found > > Writing meta data... > > initialising activity log > > NOT initialized bitmap > > New drbd meta data block sucessfully created. > > > > feeble-0:~# drbdadm attach r0 > > > > feeble-0:~# cat /proc/drbd > > version: 8.2.5 (api:88/proto:86-88) > > GIT-hash: 9faf052fdae5ef0c61b4d03890e2d2eab550610c build by > > root at feeble-0, 2008-03-04 17:03:29 > > > > 1: cs:SyncTarget st:Secondary/Primary ds:Inconsistent/UpToDate C r--- > > ns:0 nr:1417024 dw:1415552 dr:0 al:0 bm:86 lo:47 pe:9 ua:46 ap:0 > > [>....................] sync'ed: 1.0% (137877/139259)M > > finish: 0:50:23 speed: 46,640 (41,628) K/sec > > resync: used:1/31 hits:88434 misses:87 starving:0 dirty:0 changed:87 > > act_log: used:0/257 hits:0 misses:0 starving:0 dirty:0 changed:0 > > > > feeble-0:~# drbdadm connect r0 > > Failure: (125) Device has a net-config (use disconnect first) > > Command 'drbdsetup /dev/drbd1 net 10.0.0.1:7789 10.0.0.2:7789 C > > --set-defaults - -create-device --sndbuf-size=512k --max-buffers=1024 > > --timeout=60 --connect-int= 10 --ping-int=10 --ping-timeout=5 > > --ko-count=4 --cram-hmac-alg=sha1 > > --shared-secret=1e65d9df3b7c3ac2b77c8f7badc249b9c769393f' > > terminated with exit code 10 > > > > what gives? > > it has still been connected, only lost its disk? > once storage is available again, sync starts automatically. hmmm, I should have checked that in the first place. (state of drbd *before* re-attaching storage). I'll do further testing later today. Thank you for your time. (btw, the user guide simply rocks!) jf > > -- > : commercial DRBD/HA support and consulting: sales at linbit.com : > : Lars Ellenberg Tel +43-1-8178292-0 : > : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : > : Vivenotgasse 48, A-1120 Vienna/Europe http://www.linbit.com : > __ > please use the "List-Reply" function of your email client. > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user -- <° ><