Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
HI
I am new to DRBD and I meet problems when I issue "drbdadm create-md all" on
the drbd node.
Basic info is
drbd-8.2.5
centos 4.4
[root at drbd01 ~]# uname -a
Linux drbd01 2.6.9-42.ELsmp #1 SMP Sat Aug 12 09:39:11 CDT 2006 i686 i686
i386
GNU/Linux
[root at drbd01 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 6.9G 2.3G 4.3G 36% /
/dev/sda1 145M 12M 126M 9% /boot
none 125M 0 125M 0% /dev/shm
[root at drbd01 ~]# fdisk -l
Disk /dev/sda: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 19 152586 83 Linux
/dev/sda2 20 933 7341705 83 Linux
/dev/sda3 934 1194 2096482+ 83 Linux
/dev/sda4 1195 1305 891607+ 5 Extended
/dev/sda5 1195 1240 369463+ 83 Linux
/dev/sda6 1241 1305 522081 82 Linux swap
Part of drbd.conf
on drbd01 {
device /dev/drbd0;
disk /dev/sda3;
address 192.168.1.53:7788;
meta-disk /dev/sda5[0];
}
on drbd02 {
device /dev/drbd0;
disk /dev/sda3;
address 192.168.1.31:7788;
meta-disk /dev/sda5[0];
}
ERROR MESSAGE is
[root at drbd01 ~]# drbdadm create-md all
v08 Magic number not found
md_offset 0
al_offset 4096
bm_offset 36864
Found ext3 filesystem
This would corrupt existing data.
If you want me to do this, you need to zero out the first part
of the device (destroy the content).
You should be very sure that you mean it.
Operation refused.
Command 'drbdmeta /dev/drbd0 v08 /dev/sda5 0 create-md' terminated with exit
code 40
command exited with code 40
[root at drbd01 ~]#
Though I googled on the Internet, nothing useful turned up.
Any suggestions will be welcomed.
Thank You in Advance.
Xu Feng
Yuanjie Networks,Shanghai,China
MSN: xufengnju at 163.com