Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Hi there, just got a similar problem: Feb 27 18:37:19 noderz kernel: attempt to access beyond end of device Feb 27 18:37:19 noderz kernel: drbd0: rw=0, want=71827472, limit=71670624 Feb 27 18:37:19 noderz kernel: EXT3-fs error (device drbd0): read_inode_bitmap: Cannot read inode bitmap - block_group = 274, inode_bitmap = 8978433 Feb 27 18:37:19 noderz kernel: Aborting journal on device drbd0. Feb 27 18:37:19 noderz kernel: EXT3-fs error (device drbd0) in ext3_new_inode: IO failure Feb 27 18:37:19 noderz kernel: EXT3-fs error (device drbd0) in ext3_mkdir: IO failure Feb 27 18:37:34 noderz kernel: ext3_abort called. Feb 27 18:37:34 noderz kernel: EXT3-fs error (device drbd0): ext3_journal_start_sb: Detected aborted journal Feb 27 18:37:34 noderz kernel: Remounting filesystem read-only I did definitely not do a mkfs! What I did, is switching the other node between our data centers today. But what to do against? Manually force to mouti the drbd device? There are no important files on it, so I cannot destroy anything. Thanks Florian > -----Ursprüngliche Nachricht----- > Von: drbd-user-bounces at lists.linbit.com [mailto:drbd-user- > bounces at lists.linbit.com] Im Auftrag von Lars Ellenberg > Gesendet: Mittwoch, 27. Februar 2008 13:54 > An: drbd-user at lists.linbit.com > Betreff: Re: [DRBD-user] DRBD attempts to access beyond end of device > > On Tue, Feb 26, 2008 at 04:14:36PM -0500, Nate Seif wrote: > > Hello all: > > I intermittently experience the errors below while running DRBD and > > would like to correct whatever condition is causing DRBD to randomly > > lose pages. My hard disks and partitions are identical and have > > never given me problems previously. I don't see any other disk I/O > > errors in my logs. And it appears that occassionally (not always) > > these errors are preceded by a resync of the two disks. > > > > Why would DRBD "attempt to access beyond end of device"? > > > > I am running DRBD 8.06 on Gentoo Linux as I could not get my latest > > Gentoo kernel to load the DRBD module where version > 8.06. Metadata > > is "internal" and I'm running Protocol C. I'd be happy to post my > > drbd.conf page if necessary. > > > > > > Feb 26 08:21:46 <hostname> attempt to access beyond end of device > > Feb 26 08:21:46 <hostname> drbd0: rw=1, want=211992584, > > limit=211986944 Feb 26 08:21:46 <hostname> Buffer I/O error on > > device drbd0, logical block 26499072 Feb 26 08:21:46 <hostname> lost > > page write due to I/O error on drbd0 Feb 26 08:21:46 <hostname> > > attempt to access beyond end of device Feb 26 08:21:46 <hostname> > > drbd0: rw=1, want=211992592, limit=211986944 Feb 26 08:21:46 > > <hostname> Buffer I/O error on device drbd0, logical block 26499073 > > Feb 26 08:21:46 <hostname> lost page write due to I/O error on drbd0 > > > > > > Any ideas, tips, help, etc. is much appreciated. Thank you - > > let me guess: > you did mkfs /dev/sda1, not mkfs /dev/drbd0? > well, you screwed up. > > lots of threads in the list archive about this. > > -- > : Lars Ellenberg http://www.linbit.com : > : DRBD/HA support and consulting sales at linbit.com : > : LINBIT Information Technologies GmbH Tel +43-1-8178292-0 : > : Vivenotgasse 48, A-1120 Vienna/Europe Fax +43-1-8178292-82 : > __ > please use the "List-Reply" function of your email client. > _______________________________________________ > drbd-user mailing list > drbd-user at lists.linbit.com > http://lists.linbit.com/mailman/listinfo/drbd-user