[DRBD-user] Re:Problem in configuring LVM on DRBD

Vaibhav Nipunage vaibhavnipunage at gmail.com
Tue Dec 9 06:48:24 CET 2008

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


Thanks Koustubha for your suggestion.

As you said remove the sd* disk, but in my case changing the filter every
time, whenever I configured DRBD, is not manual. I have designed UI for
configuring the DRBD. So it is dynamic. So is there any other way to exclude
the used disk?

Thanks.

Vaibhav Nipunage

On Tue, Dec 9, 2008 at 10:13 AM, Koustubha Kale <kmkale at anantcorp.com>wrote:

> > I have changed the LVM filter (*filter = [ "a|sd.*|", "a/drbd.*/",
> "r|.*|"]*) to accept the DRBD devices.
>
> Guess you need "r|sd.*|", in there for it to ignore the sd* devices and put
> the pv & lv's on drbd. Unless you have some more lv's on some other sd*
> devices?
> Here is what I have for such a situation..
> filter = [ "a|/dev/drbd0|", "a|/dev/drbd1|", "a|/dev/sda2|",
> "r|/dev/sda6|", "r|/dev/sda7|" ]
> i.e. everything explicit.
>
> --
> Regards,
> Koustubha Kale
>
>
> _______________________________________________
> drbd-user mailing list
> drbd-user at lists.linbit.com
> http://lists.linbit.com/mailman/listinfo/drbd-user
>



-- 
Vaibhav Nipunage
Systems Engineer

QualEx Systems Pvt. Ltd.
www.qualexsystems.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20081209/7e844e68/attachment.htm>


More information about the drbd-user mailing list