[DRBD-user] Primary/Primary - want to force primary on one

Florian Haas florian.haas at linbit.com
Wed Apr 2 10:25:21 CEST 2008

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


Theophanis,

of course this _should_ be possible, but judging from your /proc/drbd and 
drbd.conf; you've most likely triggered a bug which is fixed in git:

http://git.drbd.org/?p=drbd-8.0.git;a=commit;h=b2f332efee55ac248d1c7770b1a4a99e6b3ef879

You have fencing=resource-only and your peer is unreachable.

This fix will be forward-ported to 8.2 and included in the next 8.2 release.

Cheers,
Florian

On Tuesday 01 April 2008 15:00:00 Theophanis Kontogiannis wrote:
> Hello all,
>
> I have drbd8 and two nodes running primary/primary.
>
> I would like if one node never boots up, to make the other one Primary
> after some time.
>
> Is it possible?
>
> Following is my config with which now if I only boot one node I get
> forever:
>
> version: 8.2.5 (api:88/proto:86-88)
> GIT-hash: 9faf052fdae5ef0c61b4d03890e2d2eab550610c build by bachbuilder@,
> 2008-03-23 14:14:24
>  0: cs:WFConnection st:Secondary/Unknown ds:Consistent/DUnknown C r---
>     ns:0 nr:0 dw:0 dr:0 al:0 bm:252 lo:0 pe:0 ua:0 ap:0
>         resync: used:0/31 hits:0 misses:0 starving:0 dirty:0 changed:0
>         act_log: used:0/257 hits:0 misses:0 starving:0 dirty:0 changed:0
>  1: cs:WFConnection st:Secondary/Unknown ds:Consistent/DUnknown C r---
>     ns:0 nr:0 dw:0 dr:0 al:0 bm:93 lo:0 pe:0 ua:0 ap:0
>         resync: used:0/31 hits:0 misses:0 starving:0 dirty:0 changed:0
>         act_log: used:0/257 hits:0 misses:0 starving:0 dirty:0 changed:0
>
> Thank you all for your time,
>
> Theophanis Kontogiannis

[...]

-- 
: Florian G. Haas
: LINBIT Information Technologies GmbH
: Vivenotgasse 48, A-1120 Vienna, Austria

When replying, there is no need to CC my personal address.
I monitor the list on a daily basis. Thank you.



More information about the drbd-user mailing list