Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Yeah already checked that (sorry should have said). ethtool reports 1000Mb/s on both nodes for the NICs in question. Jim ----- Original Message ----- From: "Darren Hoch" <darren.hoch at litemail.org> To: "James Vanns" <james.vanns at framestore-cfc.com> Cc: drbd-user at lists.linbit.com Sent: 21 March 2007 16:52:00 o'clock (GMT) Europe/London Subject: Re: [DRBD-user] Sync rate is 300K/s! Jim, I had a similar situation on two brand new Dell 1950 servers only to find out that my cross over 1GigE NICs were running at 100 half duplex. Have you checked speed using ethtool? Darren James Vanns wrote: >I have a crossover cable between two machines sporting 1GigE NICs. With DRBD 8.0.0 I'm getting a sync rate of '376 (320) K/sec' as reported by /proc/drbd! What gives!? This isn't normal as I had a better rate with beta 6 (I think). I have not put a cap on the maximum rate in the configuration file. I have also tried pausing the sync, adding a cap of ~600M, then resuming the sync all to no avail. > >Anyone else experience this? > >Jim > > > -- James Vanns Systems Programmer Framestore CFC Ltd.