Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
In all truth, it wasn't all that easy, but that's the gist. Once it's set up, changing resources is easier, and you can watch graphically where resources are running , which makes testing a lot easier. On 7/26/07, Mike Tewner <tewner at gmail.com> wrote: > > In other words, node1 and node2 go in *BOTH* haresources file. > > You should also look into using the new CRM (?) version of the config and > the grahical interface for heartbeat. You enable it by changing a line in > ha.conf . Then, you pull up the gui client and add your resources. > > > > On 7/26/07, Lars Ellenberg <lars.ellenberg at linbit.com > wrote: > > > > On Thu, Jul 26, 2007 at 10:13:50AM +0700, Nguy Tan Phuc wrote: > > > Hi All > > > I'm newcomer of heartbeat + DRBD.I don't clear drbddisk option in > > > /etc/ha.d/haresources,It can't automatic mount and start service > > postfix but > > > manual (typing command) is started > > > It auto mount and start serive postfix when before I started service > > drbd > > > and heartbeat, > > > When node1 is primary dead,node 2 is secondary must auto mount and > > start > > > service postfix > > > Can you hep me !!! > > > Thanks > > > > > > on node1 (/etc/ha.d/haresources) 172.33.34.252 Virtual IP > > > node1 IPaddr::172.33.34.252/32/eth0 drbddisk::postfix > > Filesystem::/dev/drbd0::/opt::ext3::defaults postfix > > > > > > on node2 (/etc/ha.d/haresources) 172.33.34.252 Virtual IP > > > node2 IPaddr::172.33.34.252/32/eth0 drbddisk::postfix > > Filesystem::/dev/drbd0::/opt::ext3::defaults postfix > > > > you want to read > > http://www.linux-ha.org/haresources > > > > you do not want to ignore that it says there > > "Note that it is absolutely mandatory > > for the haresources files > > to be identical > > on both machines." > > > > -- > > : Lars Ellenberg Tel +43-1-8178292-0 : > > : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : > > : Vivenotgasse 48, A-1120 Vienna/Europe http://www.linbit.com : > > __ > > please use the "List-Reply" function of your email client. > > _______________________________________________ > > drbd-user mailing list > > drbd-user at lists.linbit.com > > http://lists.linbit.com/mailman/listinfo/drbd-user > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20070726/213ec24e/attachment.htm>