Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
On Mon, Aug 27, 2007 at 12:10:39PM +0200, Jens Beyer wrote: > > Hi, > > > On Mon, Aug 27, 2007 at 10:13:48AM +0200, Lars Ellenberg wrote: > > On Mon, Aug 27, 2007 at 10:01:39AM +0200, Jens Beyer wrote: > > > > > > Unfortunately the patch didnt help. I attached the relevant traces > > > of drbd, xfsbufd and 'rm' > > > > and you are _sure_ that you unloaded the old module, > > and loded the new one containing that patch? > > > > the traces below do not look like it. > > > > To be honest, no I forgot to remove the module explicitly so I > did another test after a reboot (traces below); > Still xfsbufd is stuck reproducible at the same calls (i verified > twice...). then it is still the old unpatched module. really. do rmmod drbd; insmod ./drbd.ko verify the build-tag (time stamp) in /proc/drbd. > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950082] Call Trace: > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950092] [<ffffffff804041b1>] wait_for_completion+0xa1/0x100 > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950102] [<ffffffff80228f70>] default_wake_function+0x0/0x10 > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950111] [<ffffffff80228f70>] default_wake_function+0x0/0x10 > > > > including that patch, the next frew lines > > should happen in the context of the drbd_worker thread. > > > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950133] [<ffffffff88143938>] :drbd:_drbd_md_sync_page_io+0xc8/0x130 > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950154] [<ffffffff881442fc>] :drbd:drbd_md_sync_page_io+0x29c/0x4f0 > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950172] [<ffffffff881317a0>] :drbd:drbd_bm_get_lel+0x130/0x220 > > > Aug 27 09:52:15 boxfe02 kernel: [ 2573.950191] [<ffffffff88132a58>] :drbd:drbd_bm_write_sect+0xc8/0x220 -- : Lars Ellenberg Tel +43-1-8178292-0 : : LINBIT Information Technologies GmbH Fax +43-1-8178292-82 : : Vivenotgasse 48, A-1120 Vienna/Europe http://www.linbit.com : __ please use the "List-Reply" function of your email client.