Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
On Tue, Jun 20, 2006 at 10:49:51PM +1200, Simon wrote: > This is so i can create lv partitions on server1 and have them > automatically mirrored to server2 without changing setup (ie adding > each lv to the drdb.conf file). You'll have to manually (or in a script) activate/deactivate the lvm volumes. > In my test environment, I have server1 and server2, both with > /dev/sdb1 as the meta data drive and /dev/sdb2 as a Linux LV > partition, then both servers have "disk = /dev/sdb2" set in the > drbd.conf file. Then try to do the following with the following result > (can anyone help me here please?): > > server1:/# pvcreate /dev/drbd0 > Physical volume "/dev/drbd0" successfully created > server1:/# pvdisplay > Found duplicate PV 947ghY5ndShGUC7jE8kUuhq9xEH6nvIB: using /dev/sdb2 Change the filter directive in /etc/lvm/lvm.conf, to exclude sdb.* or just include the devices that you know will be used for lvm. -- lfr 0/0 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20060620/6d26acb5/attachment.pgp>