Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Good call. It is FC4 2.6.14_1656 . Do I need to go back just one revision? Or is there a specific kernel where this problem popped up? Thanks so much ________________________________________ Chip Burke -----Original Message----- From: Anquijix Schiptara [mailto:anquijix at hotmail.com] Sent: Friday, January 20, 2006 10:34 AM To: cburke at innova-partners.com Subject: RE: [DRBD-user] mkfs hangs If you run FC4 with newest kernel, install an older version, reinstall drbd module, and all good... There is already a similar thread according to the newest FC4-Kernel. >From: "Chip Burke" <cburke at innova-partners.com> >Reply-To: cburke at innova-partners.com >To: <drbd-user at linbit.com> >Subject: [DRBD-user] mkfs hangs >Date: Fri, 20 Jan 2006 10:13:44 -0500 > >I am running 0.7.15 and I cannot seem to format a drive. When I go to run >'mkfs -j /dev/drbd0', mfks hangs while writing the inode tables at the same >place every time. If I stop drbd and format the underlying device, it works >fine, but the drbd device is not a happy camper. Any ideas as to what the >issue may be? /dev/drbd0 is set to primary and syncs just fine with it's >slave, so everything seems okay. but the drive isn't much good with out a >files system. > > > >Thanks! > > > >________________________________________ >Chip Burke > > > >_______________________________________________ >drbd-user mailing list >drbd-user at lists.linbit.com >http://lists.linbit.com/mailman/listinfo/drbd-user