Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.
Christophe Mailhebuau wrote: > Hi, > > Yes the name is ok in drbd.conf, > > I try to add a \ but the message error change : > > heartbeat: 2006/02/15_09:22:38 info: ************************** > heartbeat: 2006/02/15_09:22:38 info: Configuration validated. Starting > heartbeat 1.2.3.cvs.20050927 > heartbeat: 2006/02/15_09:22:38 ERROR: Bad nodename in > /etc/ha.d/haresources [Filesystem::/dev/drbd0::/opt::ext3] > heartbeat: 2006/02/15_09:22:38 ERROR: Configuration error, heartbeat not > started. > > haresources : > resura-sdb1 10.24.12.60 \ > drbddisk::drbd-resource-0 \ > Filesystem::/dev/drbd0::/opt::ext3 \ > killnfsd \ > nfs \ > sleep::3 \ > IPaddr::10.12.24.60/24/eth0 > > > Le 15/02/06 at 09:57, nick a ecrit: > >>Christophe Mailhebuau wrote: >> >>>Hi, >>> >>>I have a problem to start heartbeat with drbd+nfs. >>> >>>heartbeat refuse to start. I use this howto >>>http://linux-ha.org/DRBD/NFS >>> >>>ha.cf : >>>debugfile /var/log/ha-debug >>>logfile /var/log/ha-log >>>logfacility local0 >>>deadtime 10 >>>bcast eth1 >>>ucast eth1 192.168.1.50 >>>node resura-sdb1 >>>node resura-sdb2 >>>auto_failback on >>> >>>haresources : >>>resura-sdb1 10.24.12.60 >>>drbddisk::drbd-resource-0 \ >>> Filesystem::/dev/drbd0::/opt::ext3 \ >>> killnfsd \ >>> nfs \ >>> sleep::3 \ >>> IPaddr::10.12.24.60/24/eth0 >>> >>>log ha-log say : >>> >>>heartbeat: 2006/02/15_09:09:45 info: ************************** >>>heartbeat: 2006/02/15_09:09:45 info: Configuration validated. Starting >>>heartbeat 1.2.3.cvs.20050927 >>>heartbeat: 2006/02/15_09:09:45 ERROR: Bad nodename in >>>/etc/ha.d/haresources [drbddisk::drbd-resource-0] >>>heartbeat: 2006/02/15_09:09:45 ERROR: Configuration error, heartbeat not >>>started. >>> >>>have you an idea where is the problem ? >>> >> >>Is the name you gave your node in /etc/drbd.conf drbd-resource-0 ? >> >>Look what you have in the resource field in drbd.conf >> >>Then change the line in haresources to be the same thing. > > fin du message de nick > Is /opt already mounted?