[DRBD-user] Relating primary and secondary

Kamran Nisar mkamrannisar at gmail.com
Mon Dec 18 13:22:43 CET 2006

Note: "permalinks" may not be as permanent as we would like,
direct links of old sources may well be a few messages off.


HI,

the device specified in drbd.conf is /dev/md0  , linux raid0, made from
dev/hdc1 and /dev/hdd1

after starting drbd, i'm unable to mount with the device alredy mounted
error..


test1:~ # mkdir /repl_test
test1:~ # mount /dev/md0 /repl_test
mount: /dev/md0 already mounted or /repl_test busy
test1:~ #


test1:~ # mount
/dev/hda2 on / type ext3 (rw,acl,user_xattr)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
usbfs on /proc/bus/usb type usbfs (rw)



On 12/18/06, Nicolas Bouthors <nbouthors at nbi.fr> wrote:
>
> Le 18/12/2006 17:11, Kamran Nisar écrivait  :
> > since we cannot mount the device on primary, how do we specifiy what to
> > export in /etc/export ?
>
> You CAN access device on primary. So once /dev/drbd0 is mounted, export
> this mountpoint through /etc/exports.
>
>   N
>
> --
> Nicolas Bouthors -=- Tel : 06 20 71 62 34 -=- Fax : 01 46 87 21 99
> NBi SARL -=- http://nbi.fr -=- nbouthors at nbi.fr
>



-- 
Regards
M Kamran Nisar,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linbit.com/pipermail/drbd-user/attachments/20061218/dcbb5b53/attachment.htm>


More information about the drbd-user mailing list